On Wed, Mar 25, 2020 at 6:53 PM Geert Uytterhoeven
<geert+renesas@xxxxxxxxx> wrote:
>
> arch/h8300/boot/dts/h8s_sim.dts:11.3-25: Warning (chosen_node_stdout_path): /chosen:stdout-path: property is not a string
> arch/h8300/boot/dts/h8300h_sim.dts:11.3-25: Warning (chosen_node_stdout_path): /chosen:stdout-path: property is not a string
>
> Drop the angle brackets to fix this.
>
> A similar fix was already applied to arch/h8300/boot/dts/edosk2674.dts
> in commit 780ffcd51cb28717 ("h8300: register address fix").
>
> Fixes: 38d6bded13084d50 ("h8300: devicetree source")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Masahiro Yamada <masahiroy@xxxxxxxxxx>
Unfortunately, h8300 maintainer is not responding...
How to get this in?
Perhaps, Rob can pick this up?
Thanks.
> ---
> arch/h8300/boot/dts/h8300h_sim.dts | 2 +-
> arch/h8300/boot/dts/h8s_sim.dts | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/h8300/boot/dts/h8300h_sim.dts b/arch/h8300/boot/dts/h8300h_sim.dts
> index 595398b9d0180a80..e1d4d9b7f6b40c04 100644
> --- a/arch/h8300/boot/dts/h8300h_sim.dts
> +++ b/arch/h8300/boot/dts/h8300h_sim.dts
> @@ -8,7 +8,7 @@
>
> chosen {
> bootargs = "earlyprintk=h8300-sim";
> - stdout-path = <&sci0>;
> + stdout-path = &sci0;
> };
> aliases {
> serial0 = &sci0;
> diff --git a/arch/h8300/boot/dts/h8s_sim.dts b/arch/h8300/boot/dts/h8s_sim.dts
> index 932cc3c5a81bcdd2..4848e40e607ecc1d 100644
> --- a/arch/h8300/boot/dts/h8s_sim.dts
> +++ b/arch/h8300/boot/dts/h8s_sim.dts
> @@ -8,7 +8,7 @@
>
> chosen {
> bootargs = "earlyprintk=h8300-sim";
> - stdout-path = <&sci0>;
> + stdout-path = &sci0;
> };
> aliases {
> serial0 = &sci0;
> --
> 2.17.1
>
--
Best Regards
Masahiro Yamada
