Re: [PATCH v2 4/4] dt-bindings: iio: scd30: add device binding file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 30 May 2020 23:36:30 +0200
Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx> wrote:

> Add SCD30 sensor binding file.
> 
> Signed-off-by: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
> ---
>  .../iio/chemical/sensirion,scd30.yaml         | 68 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 69 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> new file mode 100644
> index 000000000000..34cc3925d64d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sensirion SCD30 carbon dioxide sensor
> +
> +maintainers:
> +  - Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
> +
> +description: |
> +  Air quality sensor capable of measuring co2 concentration, temperature
> +  and relative humidity.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - sensirion,scd30
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  vdd-supply: true
> +
> +  sensirion,sel-gpios:
> +    description: GPIO connected to the SEL line
> +    maxItems: 1
> +
> +  sensirion,pwm-gpios:
> +    description: GPIO connected to the PWM line
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    # include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      scd30@61 {

Nodes should have generic names.  Not sure we have an appropriate
one in the spec, but as main focus of people using this will be
c02 herpas

	c02@61?  

Rob may well have a better suggestion!

> +        compatible = "sensirion,scd30";
> +        reg = <0x61>;
> +        vdd-supply = <&vdd>;
> +        interrupt-parent = <&gpio0>;
> +        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +      };
> +    };
> +  - |
> +    # include <dt-bindings/interrupt-controller/irq.h>
> +    serial {
> +      scd30 {
> +        compatible = "sensirion,scd30";
> +        vdd-supply = <&vdd>;
> +        interrupt-parent = <&gpio0>;
> +        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +      };
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5db4b446c8ba..0ab9cf39e051 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15140,6 +15140,7 @@ F:	include/uapi/linux/phantom.h
>  SENSIRION SCD30 CARBON DIOXIDE SENSOR DRIVER
>  M:	Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>
>  S:	Maintained
> +F:	Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
>  F:	drivers/iio/chemical/scd30.h
>  F:	drivers/iio/chemical/scd30_core.c
>  F:	drivers/iio/chemical/scd30_i2c.c




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux