[PATCH v2] usb/phy-generic: Add support for OTG VBUS supply control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This enables support for VBUS on boards where the power is supplied
by a regulator. The regulator is enabled when the USB port enters
HOST mode.

Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
---
v2: Added missing "return 0;" in set_vbus method

 .../devicetree/bindings/usb/usb-nop-xceiv.txt |  3 ++
 drivers/usb/phy/phy-generic.c                 | 46 ++++++++++++++++++-
 drivers/usb/phy/phy-generic.h                 |  2 +
 3 files changed, 50 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
index 4dc6a8ee3071..775a19fdb613 100644
--- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -16,6 +16,9 @@ Optional properties:
 
 - vcc-supply: phandle to the regulator that provides power to the PHY.
 
+- vbus-supply: phandle to the regulator that provides the VBUS power for when
+  the device is in HOST mode.
+
 - reset-gpios: Should specify the GPIO for reset.
 
 - vbus-detect-gpio: should specify the GPIO detecting a VBus insertion
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 661a229c105d..69bf39510e27 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -203,13 +203,45 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
 	return 0;
 }
 
+static int nop_set_vbus(struct usb_otg *otg, bool enabled)
+{
+	struct usb_phy_generic *nop;
+	int ret;
+
+	if (!otg)
+		return -ENODEV;
+
+	nop = container_of(otg->usb_phy, struct usb_phy_generic, phy);
+
+	if (!nop->vbus_reg)
+		return 0;
+
+	if (enabled) {
+		if (nop->vbus_reg_enabled)
+			return 0;
+		ret = regulator_enable(nop->vbus_reg);
+		if (ret < 0)
+			return ret;
+		nop->vbus_reg_enabled = true;
+	} else {
+		if (!nop->vbus_reg_enabled)
+			return 0;
+		ret = regulator_disable(nop->vbus_reg);
+		if (ret < 0)
+			return ret;
+		nop->vbus_reg_enabled = false;
+	}
+
+	return 0;
+}
+
 int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
 {
 	enum usb_phy_type type = USB_PHY_TYPE_USB2;
 	int err = 0;
 
 	u32 clk_rate = 0;
-	bool needs_vcc = false, needs_clk = false;
+	bool needs_vcc = false, needs_clk = false, needs_vbus = false;
 
 	if (dev->of_node) {
 		struct device_node *node = dev->of_node;
@@ -219,6 +251,7 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
 
 		needs_vcc = of_property_read_bool(node, "vcc-supply");
 		needs_clk = of_property_read_bool(node, "clocks");
+		needs_vbus = of_property_read_bool(node, "vbus-supply");
 	}
 	nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
 						   GPIOD_ASIS);
@@ -268,6 +301,16 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
 			return -EPROBE_DEFER;
 	}
 
+	nop->vbus_reg = devm_regulator_get(dev, "vbus");
+	if (IS_ERR(nop->vbus_reg)) {
+		dev_dbg(dev, "Error getting vbus regulator: %ld\n",
+					PTR_ERR(nop->vbus_reg));
+		if (needs_vbus)
+			return -EPROBE_DEFER;
+
+		nop->vbus_reg = NULL;
+	}
+
 	nop->dev		= dev;
 	nop->phy.dev		= nop->dev;
 	nop->phy.label		= "nop-xceiv";
@@ -278,6 +321,7 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
 	nop->phy.otg->usb_phy		= &nop->phy;
 	nop->phy.otg->set_host		= nop_set_host;
 	nop->phy.otg->set_peripheral	= nop_set_peripheral;
+	nop->phy.otg->set_vbus		= nop_set_vbus;
 
 	return 0;
 }
diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h
index 7ee80211a688..a3663639ea1e 100644
--- a/drivers/usb/phy/phy-generic.h
+++ b/drivers/usb/phy/phy-generic.h
@@ -14,7 +14,9 @@ struct usb_phy_generic {
 	struct gpio_desc *gpiod_reset;
 	struct gpio_desc *gpiod_vbus;
 	struct regulator *vbus_draw;
+	struct regulator *vbus_reg;
 	bool vbus_draw_enabled;
+	bool vbus_reg_enabled;
 	unsigned long mA;
 	unsigned int vbus;
 };
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux