From: Pascal Huerst <pascal.huerst@xxxxxxxxx>
This series of uart controllers is able to work in IrDA mode.
Add per-port flag to the device-tree to enable that feature if needed.
Signed-off-by: Pascal Huerst <pascal.huerst@xxxxxxxxx>
Signed-off-by: Daniel Mack <daniel@xxxxxxxxxx>
---
drivers/tty/serial/sc16is7xx.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 56508e63f9a0..deb55e2ad169 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -315,6 +315,7 @@ struct sc16is7xx_one {
struct kthread_work tx_work;
struct kthread_work reg_work;
struct sc16is7xx_one_config config;
+ bool irda_mode;
};
struct sc16is7xx_port {
@@ -986,6 +987,7 @@ static int sc16is7xx_config_rs485(struct uart_port *port,
static int sc16is7xx_startup(struct uart_port *port)
{
+ struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
unsigned int val;
@@ -1024,6 +1026,13 @@ static int sc16is7xx_startup(struct uart_port *port)
/* Now, initialize the UART */
sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_WORD_LEN_8);
+ /* Enable IrDA mode if requested in DT */
+ /* This bit must be written with LCR[7] = 0 */
+ sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
+ SC16IS7XX_MCR_IRDA_BIT,
+ one->irda_mode ?
+ SC16IS7XX_MCR_IRDA_BIT : 0);
+
/* Enable the Rx and Tx FIFO */
sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
SC16IS7XX_EFCR_RXDISABLE_BIT |
@@ -1304,6 +1313,17 @@ static int sc16is7xx_probe(struct device *dev,
sc16is7xx_power(&s->p[i].port, 0);
}
+ if (dev->of_node) {
+ struct property *prop;
+ const __be32 *p;
+ u32 u;
+
+ of_property_for_each_u32(dev->of_node, "irda-mode-ports",
+ prop, p, u)
+ if (u < devtype->nr_uart)
+ s->p[u].irda_mode = true;
+ }
+
/*
* Setup interrupt. We first try to acquire the IRQ line as level IRQ.
* If that succeeds, we can allow sharing the interrupt as well.
--
2.26.2
