On Sat 23 May 10:52 PDT 2020, Jonathan Marek wrote:
> The ufs-qcom driver checks that the name matches the androidboot.bootdevice
> parameter provided by the bootloader, which uses the name ufshc. Without
> this change UFS fails to probe.
>
Seems I only tested with UFS built as module, thanks for spotting this.
> I think this is broken behavior from the ufs-qcom driver, but using the
> name ufshc is consistent with dts for sdm845/sm8150/etc.
>
I agree. Patch applied...
Thanks,
Bjorn
> Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index e0344d3ba159..3bdce658c08a 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -309,7 +309,7 @@ uart2: serial@a90000 {
> };
> };
>
> - ufs_mem_hc: ufs@1d84000 {
> + ufs_mem_hc: ufshc@1d84000 {
> compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
> "jedec,ufs-2.0";
> reg = <0 0x01d84000 0 0x3000>;
> --
> 2.26.1
>
