Re: [Patch 1/2] dt-binbings: media: ti-vpe: Document the VIP driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 22, 2020 at 05:54:11PM -0500, Benoit Parrot wrote:
> Device Tree bindings for the Video Input Port (VIP) driver.

Bindings document h/w, not drivers.

> 
> Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
> ---
>  .../devicetree/bindings/media/ti,vip.yaml     | 394 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 395 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/ti,vip.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/ti,vip.yaml b/Documentation/devicetree/bindings/media/ti,vip.yaml
> new file mode 100644
> index 000000000000..8a9084e42329
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/ti,vip.yaml
> @@ -0,0 +1,394 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/ti,vip.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments DRA7x VIDEO INPUT PORT (VIP) Device Tree Bindings
> +
> +maintainers:
> +  - Benoit Parrot <bparrot@xxxxxx>
> +
> +description: |-
> +  The Video Input Port (VIP) is a key component for image capture
> +  applications. The capture module provides the system interface and the
> +  processing capability to connect parallel image-sensor as well as
> +  BT.656/1120 capable encoder chip to DRA7x device.
> +
> +  Each VIP instance supports 2 independently configurable external video
> +  input capture slices (Slice 0 and Slice 1) each providing up to two video
> +  input ports (Port A and Port B) where Port A can be configured as
> +  24/16/8-bit port and Port B is fixed as 8-bit port.
> +  Here these ports a represented as follows
> +    port@0 -> Slice 0 Port A
> +    port@1 -> Slice 0 Port B
> +    port@2 -> Slice 1 Port A
> +    port@3 -> Slice 1 Port B
> +
> +  Each camera port nodes should contain a 'port' child node with child
> +  'endpoint' node. Please refer to the bindings defined in
> +  Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +properties:
> +  compatible:
> +    const: ti,dra7-vip
> +
> +  label:
> +    description: Instance name

Kind of odd for this type of binding. Are there a define set or pattern 
of values.

> +
> +  reg:
> +    items:
> +      - description: The VIP main register region
> +      - description: Video Data Parser (PARSER) register region for Slice0
> +      - description: Color Space Conversion (CSC) register region for Slice0
> +      - description: Scaler (SC) register region for Slice0
> +      - description: Video Data Parser (PARSER) register region for Slice1
> +      - description: Color Space Conversion (CSC) register region for Slice1
> +      - description: Scaler (SC) register region for Slice1
> +      - description: Video Port Direct Memory Access (VPDMA) register region
> +
> +  reg-names:
> +    items:
> +      - const: vip
> +      - const: parser0
> +      - const: csc0
> +      - const: sc0
> +      - const: parser1
> +      - const: csc1
> +      - const: sc1
> +      - const: vpdma
> +
> +  interrupts:
> +    minItems: 2
> +    description:
> +      IRQ index 0 is used for Slice0 interrupts
> +      IRQ index 1 is used for Slice1 interrupts
> +
> +  ti,vip-clk-polarity:
> +    $ref: "/schemas/types.yaml#/definitions/phandle-array"
> +    description:
> +      phandle to the device control module. The 1st argument should
> +      contain the register offset to the CTRL_CORE_SMA_SW_1 register.
> +      2nd argument contains the bit field to slice 0 port A,
> +      3rd argument contains the bit field to slice 0 port B,
> +      4th argument contains the bit field to slice 1 port A,
> +      5th argument contains the bit field to slice 1 port B.
> +
> +  # See ./video-interfaces.txt for details
> +  ports:
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +      port@0:
> +        type: object
> +        additionalProperties: false
> +
> +        properties:
> +          reg:
> +            const: 0
> +            description: Slice 0 Port A
> +
> +          label:
> +            description: Port name. Usually the pin group name
> +
> +        patternProperties:
> +          endpoint:
> +            type: object
> +            additionalProperties: false
> +
> +            properties:
> +              hsync-active:
> +                maxItems: 1

Not an array. Just:

hsync-active: true

> +
> +              vsync-active:
> +                maxItems: 1
> +
> +              pclk-sample:
> +                maxItems: 1
> +
> +              bus-width:
> +                maxItems: 1

Not an array. What subset of values are allowed?

> +
> +              ti,vip-pixel-mux:
> +                type: boolean
> +                description:
> +                  In BT656/1120 mode, this enable pixel-muxing if
> +                  the number of channels is either 1, 2 or 4. If this
> +                  property is present then pixel-muxing is enabled
> +                  otherwise it will use line-muxing.
> +
> +              ti,vip-channels:
> +                $ref: "/schemas/types.yaml#definitions/uint8-array"
> +                minItems: 1
> +                maxItems: 16
> +                description: |-
> +                  In BT656/1120 mode, list of channel ids to be captured.
> +                  If the property is not present then 1 channel is assumed.
> +
> +              remote-endpoint: true
> +
> +        required:
> +          - reg
> +          - label
> +
> +      port@1:
> +        type: object
> +        additionalProperties: false
> +
> +        properties:
> +          reg:
> +            const: 1
> +            description: Slice 0 Port B
> +
> +          label:
> +            description: Port name. Usually the pin group name
> +
> +        patternProperties:
> +          endpoint:
> +            type: object
> +            additionalProperties: false
> +
> +            properties:
> +              hsync-active:
> +                maxItems: 1
> +
> +              vsync-active:
> +                maxItems: 1
> +
> +              pclk-sample:
> +                maxItems: 1
> +
> +              bus-width:
> +                maxItems: 1
> +
> +              ti,vip-pixel-mux:
> +                type: boolean
> +                description:
> +                  In BT656/1120 mode, this enable pixel-muxing if
> +                  the number of channels is either 1, 2 or 4. If this
> +                  property is present then pixel-muxing is enabled
> +                  otherwise it will use line-muxing.
> +
> +              ti,vip-channels:
> +                $ref: "/schemas/types.yaml#definitions/uint8-array"
> +                minItems: 1
> +                maxItems: 16
> +                description:
> +                  In BT656/1120 mode, list of channel ids to be captured.
> +                  If the property is not present then 1 channel is assumed.
> +
> +              remote-endpoint: true
> +
> +        required:
> +          - reg
> +          - label
> +
> +      port@2:
> +        type: object
> +        additionalProperties: false
> +
> +        properties:
> +          reg:
> +            const: 2
> +            description: Slice 1 Port A
> +
> +          label:
> +            description: Port name. Usually the pin group name
> +
> +        patternProperties:
> +          endpoint:
> +            type: object
> +            additionalProperties: false
> +
> +            properties:
> +              hsync-active:
> +                maxItems: 1
> +
> +              vsync-active:
> +                maxItems: 1
> +
> +              pclk-sample:
> +                maxItems: 1
> +
> +              bus-width:
> +                maxItems: 1
> +
> +              ti,vip-pixel-mux:
> +                type: boolean
> +                description:
> +                  In BT656/1120 mode, this enable pixel-muxing if
> +                  the number of channels is either 1, 2 or 4. If this
> +                  property is present then pixel-muxing is enabled
> +                  otherwise it will use line-muxing.
> +
> +              ti,vip-channels:
> +                $ref: "/schemas/types.yaml#definitions/uint8-array"
> +                minItems: 1
> +                maxItems: 16
> +                description:
> +                  In BT656/1120 mode, list of channel ids to be captured.
> +                  If the property is not present then 1 channel is assumed.
> +
> +              remote-endpoint: true
> +
> +        required:
> +          - reg
> +          - label
> +
> +      port@3:
> +        type: object
> +        additionalProperties: false
> +
> +        properties:
> +          reg:
> +            const: 3
> +            description: Slice 1 Port B
> +
> +          label:
> +            description: Port name. Usually the pin group name
> +
> +        patternProperties:
> +          endpoint:
> +            type: object
> +            additionalProperties: false
> +
> +            properties:
> +              hsync-active:
> +                maxItems: 1
> +
> +              vsync-active:
> +                maxItems: 1
> +
> +              pclk-sample:
> +                maxItems: 1
> +
> +              bus-width:
> +                maxItems: 1
> +
> +              ti,vip-pixel-mux:
> +                type: boolean
> +                description:
> +                  In BT656/1120 mode, this enable pixel-muxing if
> +                  the number of channels is either 1, 2 or 4. If this
> +                  property is present then pixel-muxing is enabled
> +                  otherwise it will use line-muxing.
> +
> +              ti,vip-channels:
> +                $ref: "/schemas/types.yaml#definitions/uint8-array"
> +                minItems: 1
> +                maxItems: 16
> +                description:
> +                  In BT656/1120 mode, list of channel ids to be captured.
> +                  If the property is not present then 1 channel is assumed.
> +
> +              remote-endpoint: true

If all the properties are the same across ports, then do a 
patternProperties with '^port@' and define them there. You'll still need 
'port@0', etc. to define what each port is.

> +
> +        required:
> +          - reg
> +          - label
> +
> +    required:
> +      - "#address-cells"
> +      - "#size-cells"
> +      - port@0
> +
> +required:
> +  - compatible
> +  - label
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - ti,vip-clk-polarity
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    vip1: vip@48970000 {
> +        compatible = "ti,dra7-vip";
> +        label = "vip1";
> +        reg = <0x48970000 0x114>,
> +              <0x48975500 0xD8>,
> +              <0x48975700 0x18>,
> +              <0x48975800 0x80>,
> +              <0x48975a00 0xD8>,
> +              <0x48975c00 0x18>,
> +              <0x48975d00 0x80>,
> +              <0x4897d000 0x400>;
> +        reg-names = "vip",
> +                    "parser0",
> +                    "csc0",
> +                    "sc0",
> +                    "parser1",
> +                    "csc1",
> +                    "sc1",
> +                    "vpdma";
> +        interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
> +        ti,vip-clk-polarity = <&scm_conf 0x534 0x1 0x4 0x2 0x8>;
> +
> +        ports {
> +              #address-cells = <1>;
> +              #size-cells = <0>;
> +
> +              vin1a: port@0 {
> +                    reg = <0>;
> +                    label = "vin1a";
> +
> +                    vin1a_ep: endpoint {
> +                           remote-endpoint = <&camera1>;
> +                           hsync-active = <1>;
> +                           vsync-active = <1>;
> +                           pclk-sample = <0>;
> +                           bus-width = <8>;
> +                    };
> +              };
> +              vin1b: port@1 {
> +                    reg = <1>;
> +                    label = "vin1b";
> +              };
> +              vin2a: port@2 {
> +                    reg = <2>;
> +                    label = "vin2a";
> +              };
> +              vin2b: port@3 {
> +                    reg = <3>;
> +                    label = "vin2b";
> +              };
> +         };
> +    };
> +
> +    i2c {
> +        clock-frequency = <400000>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +         camera@37 {
> +              compatible = "ovti,ov10633";
> +              reg = <0x37>;
> +
> +              clocks = <&fixed_clock>;
> +              clocks-names = "xvclk";
> +
> +              port {
> +                   camera1: endpoint {
> +                           remote-endpoint = <&vin1a_ep>;
> +                           hsync-active = <1>;
> +                           vsync-active = <1>;
> +                           pclk-sample = <0>;
> +                           bus-width = <8>;
> +                   };
> +              };
> +         };
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2e9a5f6e4ff7..06856d05b53b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16947,6 +16947,7 @@ S:	Maintained
>  W:	http://linuxtv.org/
>  Q:	http://patchwork.linuxtv.org/project/linux-media/list/
>  F:	Documentation/devicetree/bindings/media/ti,cal.yaml
> +F:	Documentation/devicetree/bindings/media/ti,vip.yaml
>  F:	Documentation/devicetree/bindings/media/ti,vpe.yaml
>  F:	drivers/media/platform/ti-vpe/
>  
> -- 
> 2.17.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux