[PATCH v12 4/4] power: supply: bq25150 introduce the bq25150

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Introduce the bq2515x family of chargers.

The BQ2515X family of devices are highly integrated battery management
ICs that integrate the most common functions for wearable devices
namely a charger, an output voltage rail, ADC for battery and system
monitoring, and a push-button controller.

Datasheets:
	bq25150 - http://www.ti.com/lit/ds/symlink/bq25150.pdf
	bq25155 - http://www.ti.com/lit/ds/symlink/bq25155.pdf

Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@xxxxxx>
---
 drivers/power/supply/Kconfig           |   13 +
 drivers/power/supply/Makefile          |    1 +
 drivers/power/supply/bq2515x_charger.c | 1158 ++++++++++++++++++++++++
 3 files changed, 1172 insertions(+)
 create mode 100644 drivers/power/supply/bq2515x_charger.c

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index f3424fdce341..266193301e2d 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -589,6 +589,19 @@ config CHARGER_BQ24735
 	help
 	  Say Y to enable support for the TI BQ24735 battery charger.
 
+config CHARGER_BQ2515X
+	tristate "TI BQ2515X battery charger family"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI BQ2515X family of battery
+	  charging integrated circuits. The BQ2515X are highly integrated
+	  battery charge management ICs that integrate the most common
+	  functions for wearable devices, namely a charger, an output voltage
+	  rail, ADC for battery and system monitoring, and push-button
+	  controller.
+
 config CHARGER_BQ25890
 	tristate "TI BQ25890 battery charger driver"
 	depends on I2C
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 6c7da920ea83..8fcc175a7e22 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -80,6 +80,7 @@ obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
 obj-$(CONFIG_CHARGER_BQ24190)	+= bq24190_charger.o
 obj-$(CONFIG_CHARGER_BQ24257)	+= bq24257_charger.o
 obj-$(CONFIG_CHARGER_BQ24735)	+= bq24735-charger.o
+obj-$(CONFIG_CHARGER_BQ2515X)	+= bq2515x_charger.o
 obj-$(CONFIG_CHARGER_BQ25890)	+= bq25890_charger.o
 obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o
 obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o
diff --git a/drivers/power/supply/bq2515x_charger.c b/drivers/power/supply/bq2515x_charger.c
new file mode 100644
index 000000000000..f386484b5035
--- /dev/null
+++ b/drivers/power/supply/bq2515x_charger.c
@@ -0,0 +1,1158 @@
+// SPDX-License-Identifier: GPL-2.0
+// BQ2515X Battery Charger Driver
+// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#define BQ2515X_MANUFACTURER "Texas Instruments"
+
+#define BQ2515X_STAT0		0x00
+#define BQ2515X_STAT1		0x01
+#define BQ2515X_STAT2		0x02
+#define BQ2515X_FLAG0		0x03
+#define BQ2515X_FLAG1		0x04
+#define BQ2515X_FLAG2		0x05
+#define BQ2515X_FLAG3		0x06
+#define BQ2515X_MASK0		0x07
+#define BQ2515X_MASK1		0x08
+#define BQ2515X_MASK2		0x09
+#define BQ2515X_MASK3		0x0a
+#define BQ2515X_VBAT_CTRL	0x12
+#define BQ2515X_ICHG_CTRL	0x13
+#define BQ2515X_PCHRGCTRL	0x14
+#define BQ2515X_TERMCTRL	0x15
+#define BQ2515X_BUVLO		0x16
+#define BQ2515X_CHARGERCTRL0	0x17
+#define BQ2515X_CHARGERCTRL1	0x18
+#define BQ2515X_ILIMCTRL	0x19
+#define BQ2515X_LDOCTRL		0x1d
+#define BQ2515X_MRCTRL		0x30
+#define BQ2515X_ICCTRL0		0x35
+#define BQ2515X_ICCTRL1		0x36
+#define BQ2515X_ICCTRL2		0x37
+#define BQ2515X_ADCCTRL0	0x40
+#define BQ2515X_ADCCTRL1	0x41
+#define BQ2515X_ADC_VBAT_M	0x42
+#define BQ2515X_ADC_VBAT_L	0x43
+#define BQ2515X_ADC_TS_M	0x44
+#define BQ2515X_ADC_TS_L	0x45
+#define BQ2515X_ADC_ICHG_M	0x46
+#define BQ2515X_ADC_ICHG_L	0x47
+#define BQ2515X_ADC_ADCIN_M	0x48
+#define BQ2515X_ADC_ADCIN_L	0x49
+#define BQ2515X_ADC_VIN_M	0x4a
+#define BQ2515X_ADC_VIN_L	0x4b
+#define BQ2515X_ADC_PMID_M	0x4c
+#define BQ2515X_ADC_PMID_L	0x4d
+#define BQ2515X_ADC_IIN_M	0x4e
+#define BQ2515X_ADC_IIN_L	0x4f
+#define BQ2515X_ADC_COMP1_M	0x52
+#define BQ2515X_ADC_COMP1_L	0X53
+#define BQ2515X_ADC_COMP2_M	0X54
+#define BQ2515X_ADC_COMP2_L	0x55
+#define BQ2515X_ADC_COMP3_M	0x56
+#define BQ2515X_ADC_COMP3_L	0x57
+#define BQ2515X_ADC_READ_EN	0x58
+#define BQ2515X_TS_FASTCHGCTRL	0x61
+#define BQ2515X_TS_COLD		0x62
+#define BQ2515X_TS_COOL		0x63
+#define BQ2515X_TS_WARM		0x64
+#define BQ2515X_TS_HOT		0x65
+#define BQ2515X_DEVICE_ID	0x6f
+
+#define BQ2515X_DEFAULT_ICHG_UA		10000
+#define BQ25150_DEFAULT_ILIM_UA		100000
+#define BQ25155_DEFAULT_ILIM_UA		500000
+#define BQ2515X_DEFAULT_VBAT_REG_UV	4200000
+#define BQ2515X_DEFAULT_IPRECHARGE_UA	2500
+
+#define BQ2515X_DIVISOR				65536
+#define BQ2515X_VBAT_BASE_VOLT			3600000
+#define BQ2515X_VBAT_REG_MAX			4600000
+#define BQ2515X_VBAT_REG_MIN			3600000
+#define BQ2515X_VBAT_STEP_UV			10000
+#define BQ2515X_UV_FACTOR			1000000
+#define BQ2515X_VBAT_MULTIPLIER			6
+#define BQ2515X_ICHG_DIVISOR			52429
+#define BQ2515X_ICHG_CURR_STEP_THRESH_UA	318750
+#define BQ2515X_ICHG_MIN_UA			0
+#define BQ2515X_ICHG_MAX_UA			500000
+#define BQ2515X_ICHG_RNG_1B0_UA			1250
+#define BQ2515X_ICHG_RNG_1B1_UA			2500
+#define BQ2515X_VLOWV_SEL_1B0_UV		3000000
+#define BQ2515X_VLOWV_SEL_1B1_UV		2800000
+#define BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA	18750
+#define BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA	37500
+#define BQ2515X_TWAKE2_MIN_US			1700000
+#define BQ2515X_TWAKE2_MAX_US			2300000
+
+#define BQ2515X_ILIM_150MA	0x2
+#define BQ2515X_ILIM_MASK	0x7
+#define BQ2515X_ILIM_MIN	50000
+#define BQ2515X_ILIM_MAX	600000
+#define BQ2515X_HEALTH_MASK	0xf
+#define BQ2515X_ICHGRNG_MASK	0x80
+#define BQ2515X_STAT0_MASK	0x0f
+#define BQ2515X_STAT1_MASK	0x1f
+#define BQ2515X_PRECHARGE_MASK	0x1f
+
+#define BQ2515X_TS_HOT_STAT		BIT(0)
+#define BQ2515X_TS_WARM_STAT		BIT(1)
+#define BQ2515X_TS_COOL_STAT		BIT(2)
+#define BQ2515X_TS_COLD_STAT		BIT(3)
+#define BQ2515X_SAFETY_TIMER_EXP	BIT(5)
+
+#define BQ2515X_EN_VBAT_READ		BIT(3)
+#define BQ2515X_EN_ICHG_READ		BIT(5)
+
+#define BQ2515X_VIN_GOOD		BIT(0)
+#define BQ2515X_CHRG_DONE		BIT(5)
+#define BQ2515X_CV_CHRG_MODE		BIT(6)
+
+#define BQ2515X_VIN_OVP_FAULT_STAT	BIT(7)
+
+#define BQ2515X_WATCHDOG_DISABLE	BIT(4)
+
+#define BQ2515X_ICHARGE_RANGE		BIT(7)
+
+#define BQ2515X_VLOWV_SEL		BIT(5)
+
+#define BQ2515X_CHARGER_DISABLE		BIT(0)
+
+#define BQ2515X_HWRESET_14S_WD		BIT(1)
+
+static const int bq2515x_ilim_lvl_values[] = {
+	50000, 100000, 150000, 200000, 300000, 400000, 500000, 600000
+};
+
+/**
+ * struct bq2515x_init_data -
+ * @ilim: input current limit
+ */
+struct bq2515x_init_data {
+	int ilim;
+};
+
+enum bq2515x_id {
+	BQ25150,
+	BQ25155,
+};
+
+/**
+ * struct bq2515x_device -
+ * @mains: mains properties
+ * @battery: battery properties
+ * @regmap: register map structure
+ * @dev: device structure
+ *
+ * @reset_gpio: manual reset (MR) pin
+ * @powerdown_gpio: low power mode pin
+ * @ac_detect_gpio: power good (PG) pin
+ * @ce_gpio: charge enable (CE) pin
+ *
+ * @model_name: string value describing device model
+ * @device_id: value of device_id
+ * @mains_online: boolean value indicating power supply online
+ *
+ * @bq2515x_init_data init_data: charger initialization data structure
+ */
+struct bq2515x_device {
+	struct power_supply *mains;
+	struct power_supply *battery;
+	struct regmap *regmap;
+	struct device *dev;
+
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *powerdown_gpio;
+	struct gpio_desc *ac_detect_gpio;
+	struct gpio_desc *ce_gpio;
+
+	char model_name[I2C_NAME_SIZE];
+	int device_id;
+	bool mains_online;
+
+	struct bq2515x_init_data init_data;
+};
+
+static struct reg_default bq25150_reg_defaults[] = {
+	{BQ2515X_FLAG0, 0x0},
+	{BQ2515X_FLAG1, 0x0},
+	{BQ2515X_FLAG2, 0x0},
+	{BQ2515X_FLAG3, 0x0},
+	{BQ2515X_MASK0, 0x0},
+	{BQ2515X_MASK1, 0x0},
+	{BQ2515X_MASK2, 0x71},
+	{BQ2515X_MASK3, 0x0},
+	{BQ2515X_VBAT_CTRL, 0x3C},
+	{BQ2515X_ICHG_CTRL, 0x8},
+	{BQ2515X_PCHRGCTRL, 0x2},
+	{BQ2515X_TERMCTRL, 0x14},
+	{BQ2515X_BUVLO, 0x0},
+	{BQ2515X_CHARGERCTRL0, 0x82},
+	{BQ2515X_CHARGERCTRL1, 0x42},
+	{BQ2515X_ILIMCTRL, 0x1},
+	{BQ2515X_LDOCTRL, 0xB0},
+	{BQ2515X_MRCTRL, 0x2A},
+	{BQ2515X_ICCTRL0, 0x10},
+	{BQ2515X_ICCTRL1, 0x0},
+	{BQ2515X_ICCTRL2, 0x0},
+	{BQ2515X_ADCCTRL0, 0x2},
+	{BQ2515X_ADCCTRL1, 0x40},
+	{BQ2515X_ADC_COMP1_M, 0x23},
+	{BQ2515X_ADC_COMP1_L, 0x20},
+	{BQ2515X_ADC_COMP2_M, 0x38},
+	{BQ2515X_ADC_COMP2_L, 0x90},
+	{BQ2515X_ADC_COMP3_M, 0x0},
+	{BQ2515X_ADC_COMP3_L, 0x0},
+	{BQ2515X_ADC_READ_EN, 0x0},
+	{BQ2515X_TS_FASTCHGCTRL, 0x34},
+	{BQ2515X_TS_COLD, 0x7C},
+	{BQ2515X_TS_COOL, 0x6D},
+	{BQ2515X_TS_WARM, 0x38},
+	{BQ2515X_TS_HOT, 0x27},
+	{BQ2515X_DEVICE_ID, 0x20},
+};
+
+static struct reg_default bq25155_reg_defaults[] = {
+	{BQ2515X_FLAG0, 0x0},
+	{BQ2515X_FLAG1, 0x0},
+	{BQ2515X_FLAG2, 0x0},
+	{BQ2515X_FLAG3, 0x0},
+	{BQ2515X_MASK0, 0x0},
+	{BQ2515X_MASK1, 0x0},
+	{BQ2515X_MASK2, 0x71},
+	{BQ2515X_MASK3, 0x0},
+	{BQ2515X_VBAT_CTRL, 0x3C},
+	{BQ2515X_ICHG_CTRL, 0x8},
+	{BQ2515X_PCHRGCTRL, 0x2},
+	{BQ2515X_TERMCTRL, 0x14},
+	{BQ2515X_BUVLO, 0x0},
+	{BQ2515X_CHARGERCTRL0, 0x82},
+	{BQ2515X_CHARGERCTRL1, 0xC2},
+	{BQ2515X_ILIMCTRL, 0x6},
+	{BQ2515X_LDOCTRL, 0xB0},
+	{BQ2515X_MRCTRL, 0x2A},
+	{BQ2515X_ICCTRL0, 0x10},
+	{BQ2515X_ICCTRL1, 0x0},
+	{BQ2515X_ICCTRL2, 0x40},
+	{BQ2515X_ADCCTRL0, 0x2},
+	{BQ2515X_ADCCTRL1, 0x40},
+	{BQ2515X_ADC_COMP1_M, 0x23},
+	{BQ2515X_ADC_COMP1_L, 0x20},
+	{BQ2515X_ADC_COMP2_M, 0x38},
+	{BQ2515X_ADC_COMP2_L, 0x90},
+	{BQ2515X_ADC_COMP3_M, 0x0},
+	{BQ2515X_ADC_COMP3_L, 0x0},
+	{BQ2515X_ADC_READ_EN, 0x0},
+	{BQ2515X_TS_FASTCHGCTRL, 0x34},
+	{BQ2515X_TS_COLD, 0x7C},
+	{BQ2515X_TS_COOL, 0x6D},
+	{BQ2515X_TS_WARM, 0x38},
+	{BQ2515X_TS_HOT, 0x27},
+	{BQ2515X_DEVICE_ID, 0x35},
+};
+
+static int bq2515x_wake_up(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	int val;
+
+	/* Read the STAT register if we can read it then the device is out
+	 * of ship mode.  If the register cannot be read then attempt to wake
+	 * it up and enable the ADC.
+	 */
+	ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
+	if (ret)
+		return ret;
+
+	/* Need to toggle LP and bring device out of ship mode. The device
+	 * will exit the ship mode when the MR pin is held low for at least
+	 * t_WAKE2 as shown in section 8.3.7.1 of the datasheet.
+	 */
+	gpiod_set_value_cansleep(bq2515x->powerdown_gpio, 0);
+
+	gpiod_set_value_cansleep(bq2515x->reset_gpio, 0);
+	usleep_range(BQ2515X_TWAKE2_MIN_US, BQ2515X_TWAKE2_MAX_US);
+	gpiod_set_value_cansleep(bq2515x->reset_gpio, 1);
+
+	return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN,
+				(BQ2515X_EN_VBAT_READ | BQ2515X_EN_ICHG_READ));
+}
+
+static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x)
+{
+	bool dc = false;
+	unsigned int val;
+	int ret;
+
+	if (bq2515x->ac_detect_gpio)
+		val = gpiod_get_value_cansleep(bq2515x->ac_detect_gpio);
+	else {
+		ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
+		if (ret)
+			return ret;
+	}
+
+	dc = val & BQ2515X_VIN_GOOD;
+
+	ret = bq2515x->mains_online != dc;
+
+	bq2515x->mains_online = dc;
+
+	return ret;
+}
+
+static int bq2515x_disable_watchdog_timers(struct bq2515x_device *bq2515x)
+{
+	int ret;
+
+	ret = regmap_update_bits(bq2515x->regmap, BQ2515X_CHARGERCTRL0,
+			BQ2515X_WATCHDOG_DISABLE, BQ2515X_WATCHDOG_DISABLE);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
+						BQ2515X_HWRESET_14S_WD, 0);
+}
+
+static int bq2515x_get_battery_voltage_now(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	int vbat_msb;
+	int vbat_lsb;
+	uint32_t vbat_measurement;
+
+	if (!bq2515x->mains_online)
+		bq2515x_wake_up(bq2515x);
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vbat_msb);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vbat_lsb);
+	if (ret)
+		return ret;
+
+	vbat_measurement = (vbat_msb << 8) | vbat_lsb;
+
+	return vbat_measurement * (BQ2515X_UV_FACTOR / BQ2515X_DIVISOR) *
+						BQ2515X_VBAT_MULTIPLIER;
+}
+
+static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	int ichg_msb;
+	int ichg_lsb;
+	uint32_t ichg_measurement;
+	u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+	unsigned int ichg_reg_code, reg_code;
+	unsigned int icharge_range = 0, pchrgctrl;
+	unsigned int buvlo, vlowv_sel, vlowv = BQ2515X_VLOWV_SEL_1B0_UV;
+
+	if (!bq2515x->mains_online)
+		return -ENODATA;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_M, &ichg_msb);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_L, &ichg_lsb);
+	if (ret)
+		return ret;
+
+	ichg_measurement = (ichg_msb << 8) | ichg_lsb;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_BUVLO, &buvlo);
+	if (ret)
+		return ret;
+
+	vlowv_sel = buvlo & BQ2515X_VLOWV_SEL;
+
+	if (vlowv_sel)
+		vlowv = BQ2515X_VLOWV_SEL_1B1_UV;
+
+	if (bq2515x_get_battery_voltage_now(bq2515x) < vlowv) {
+		ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+								&pchrgctrl);
+		if (ret)
+			return ret;
+
+		reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
+	} else {
+		ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL,
+							&ichg_reg_code);
+		if (ret)
+			return ret;
+
+		reg_code = ichg_reg_code;
+	}
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+	if (ret)
+		return ret;
+
+	icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+	if (icharge_range)
+		ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+	return reg_code * (ichg_multiplier * ichg_measurement /
+							BQ2515X_ICHG_DIVISOR);
+}
+
+static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	int ce_pin;
+	int icctrl2;
+	int charger_disable;
+
+	ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio);
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2);
+	if (ret)
+		return ret;
+
+	charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE;
+
+	if (charger_disable || ce_pin)
+		return true;
+
+	return false;
+}
+
+static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int val)
+{
+	gpiod_set_value_cansleep(bq2515x->ce_gpio, val);
+
+	return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
+					BQ2515X_CHARGER_DISABLE, val);
+}
+
+static int bq2515x_get_const_charge_current(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+	unsigned int ichg_reg_code;
+	unsigned int pchrgctrl;
+	unsigned int icharge_range;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, &ichg_reg_code);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+	if (ret)
+		return ret;
+
+	icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+	if (icharge_range)
+		ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+	return ichg_reg_code * ichg_multiplier;
+}
+
+static int bq2515x_set_const_charge_current(struct bq2515x_device *bq2515x,
+								int val)
+{
+	int ret;
+	unsigned int ichg_reg_code;
+	u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+	unsigned int icharge_range = 0;
+
+	if (val > BQ2515X_ICHG_MAX_UA || val < BQ2515X_ICHG_MIN_UA)
+		return -EINVAL;
+
+	if (val > BQ2515X_ICHG_CURR_STEP_THRESH_UA) {
+		ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+		icharge_range = BQ2515X_ICHARGE_RANGE;
+	}
+
+	bq2515x_set_charge_disable(bq2515x, 1);
+
+	ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+					BQ2515X_ICHARGE_RANGE, icharge_range);
+	if (ret)
+		return ret;
+
+	ichg_reg_code = val / ichg_multiplier;
+
+	ret = regmap_write(bq2515x->regmap, BQ2515X_ICHG_CTRL, ichg_reg_code);
+	if (ret)
+		return ret;
+
+	return bq2515x_set_charge_disable(bq2515x, 0);
+}
+
+static int bq2515x_get_precharge_current(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	unsigned int pchrgctrl;
+	unsigned int icharge_range;
+	u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+	unsigned int precharge_reg_code;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+	if (ret)
+		return ret;
+
+	icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+	if (icharge_range)
+		precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+	precharge_reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
+
+	return precharge_reg_code * precharge_multiplier;
+}
+
+static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x,
+					int val)
+{
+	int ret;
+	unsigned int pchrgctrl;
+	unsigned int icharge_range;
+	unsigned int precharge_reg_code;
+	unsigned int precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+	unsigned int precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+	if (ret)
+		return ret;
+
+	icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+	if (icharge_range) {
+		precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA;
+		precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+	} else {
+		precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
+		precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+	}
+	if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA)
+		return -EINVAL;
+
+	precharge_reg_code = val / precharge_multiplier;
+
+	ret = bq2515x_set_charge_disable(bq2515x, 1);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+				BQ2515X_PRECHARGE_MASK, precharge_reg_code);
+	if (ret)
+		return ret;
+
+	return bq2515x_set_charge_disable(bq2515x, 0);
+}
+
+static int bq2515x_charging_status(struct bq2515x_device *bq2515x,
+				   union power_supply_propval *val)
+{
+	bool status0_no_fault;
+	bool status1_no_fault;
+	bool ce_status;
+	bool charge_done;
+	unsigned int status;
+	int ret;
+
+	if (!bq2515x->mains_online) {
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		return 0;
+	}
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status);
+	if (ret)
+		return ret;
+
+	/*
+	 * The code block below is used to determine if any faults from the
+	 * STAT0 register are disbaling charging or if the charge has completed
+	 * according to the CHARGE_DONE_STAT bit.
+	 */
+	if (((status & BQ2515X_STAT0_MASK) == true) &
+			((status & BQ2515X_CHRG_DONE) == false)) {
+		status0_no_fault = true;
+		charge_done = false;
+	} else if (status & BQ2515X_CHRG_DONE) {
+		charge_done = true;
+		status0_no_fault = false;
+	} else {
+		status0_no_fault = false;
+		charge_done = false;
+	}
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &status);
+	if (ret)
+		return ret;
+	/*
+	 * The code block below is used to determine if any faults from the
+	 * STAT1 register are disbaling charging
+	 */
+	if ((status & BQ2515X_STAT1_MASK) == false)
+		status1_no_fault = true;
+	else
+		status1_no_fault = false;
+
+	ce_status = (!bq2515x_get_charge_disable(bq2515x));
+
+	/*
+	 * If there are no faults and charging is enabled, then status is
+	 * charging. Otherwise, if charging is complete, then status is full.
+	 * Otherwise, if a fault exists or charging is disabled, then status is
+	 * not charging
+	 */
+	if (status0_no_fault & status1_no_fault & ce_status)
+		val->intval = POWER_SUPPLY_STATUS_CHARGING;
+	else if (charge_done)
+		val->intval = POWER_SUPPLY_STATUS_FULL;
+	else if (!(status0_no_fault & status1_no_fault & ce_status))
+		val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+	return 0;
+}
+
+static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x)
+{
+	int vbat_reg_code;
+	int ret;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code);
+	if (ret)
+		return ret;
+
+	return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * BQ2515X_VBAT_STEP_UV;
+}
+
+static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val)
+{
+	int vbat_reg_code;
+
+	if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN)
+		return -EINVAL;
+
+	vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / BQ2515X_VBAT_STEP_UV;
+
+	return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code);
+}
+
+static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	int ilimctrl;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilimctrl);
+	if (ret)
+		return ret;
+
+	return bq2515x_ilim_lvl_values[ilimctrl & BQ2515X_ILIM_MASK];
+}
+
+static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val)
+{
+	int i = 0;
+	unsigned int array_size = ARRAY_SIZE(bq2515x_ilim_lvl_values);
+
+	for (i = array_size - 1; i > 0; i--) {
+		if (val >= bq2515x_ilim_lvl_values[i])
+			break;
+	}
+	return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i);
+}
+
+static int bq2515x_power_supply_property_is_writeable(struct power_supply *psy,
+					enum power_supply_property prop)
+{
+	switch (prop) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x,
+				      union power_supply_propval *val)
+{
+	int health = POWER_SUPPLY_HEALTH_GOOD;
+	int ret;
+	unsigned int stat1;
+	unsigned int flag3;
+
+	if (!bq2515x->mains_online)
+		bq2515x_wake_up(bq2515x);
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &flag3);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &stat1);
+	if (ret)
+		return ret;
+
+	if (stat1 & BQ2515X_HEALTH_MASK) {
+		switch (stat1 & BQ2515X_HEALTH_MASK) {
+		case BQ2515X_TS_HOT_STAT:
+			health = POWER_SUPPLY_HEALTH_HOT;
+			break;
+		case BQ2515X_TS_WARM_STAT:
+			health = POWER_SUPPLY_HEALTH_WARM;
+			break;
+		case BQ2515X_TS_COOL_STAT:
+			health = POWER_SUPPLY_HEALTH_COOL;
+			break;
+		case BQ2515X_TS_COLD_STAT:
+			health = POWER_SUPPLY_HEALTH_COLD;
+			break;
+		default:
+			health = POWER_SUPPLY_HEALTH_UNKNOWN;
+			break;
+		}
+	}
+
+	if (stat1 & BQ2515X_VIN_OVP_FAULT_STAT)
+		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+
+	if (flag3 & BQ2515X_SAFETY_TIMER_EXP)
+		health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+
+	val->intval = health;
+	return 0;
+}
+
+static int bq2515x_mains_set_property(struct power_supply *psy,
+		enum power_supply_property prop,
+		const union power_supply_propval *val)
+{
+	struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq2515x_set_ilim_lvl(bq2515x, val->intval);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int bq2515x_battery_set_property(struct power_supply *psy,
+		enum power_supply_property prop,
+		const union power_supply_propval *val)
+{
+	struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq2515x_set_batt_reg(bq2515x, val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq2515x_set_const_charge_current(bq2515x, val->intval);
+		break;
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		ret = bq2515x_set_precharge_current(bq2515x, val->intval);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int bq2515x_mains_get_property(struct power_supply *psy,
+				     enum power_supply_property prop,
+				     union power_supply_propval *val)
+{
+	struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = bq2515x->mains_online;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = bq2515x_charger_get_health(bq2515x, val);
+		if (ret)
+			val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq2515x_get_ilim_lvl(bq2515x);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bq2515x->model_name;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = BQ2515X_MANUFACTURER;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = bq2515x_charging_status(bq2515x, val);
+		if (ret)
+			return ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int bq2515x_battery_get_property(struct power_supply *psy,
+				       enum power_supply_property prop,
+				       union power_supply_propval *val)
+{
+	struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+	int ret;
+
+	ret = bq2515x_update_ps_status(bq2515x);
+	if (ret)
+		return ret;
+
+	switch (prop) {
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = bq2515x_get_battery_voltage_now(bq2515x);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = bq2515x_get_battery_current_now(bq2515x);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq2515x_get_const_charge_current(bq2515x);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		ret = bq2515x_get_precharge_current(bq2515x);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq2515x_get_batt_reg(bq2515x);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static enum power_supply_property bq2515x_battery_properties[] = {
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+};
+
+static enum power_supply_property bq2515x_mains_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static struct power_supply_desc bq2515x_mains_desc = {
+	.name			= "bq2515x-mains",
+	.type			= POWER_SUPPLY_TYPE_MAINS,
+	.get_property		= bq2515x_mains_get_property,
+	.set_property		= bq2515x_mains_set_property,
+	.properties		= bq2515x_mains_properties,
+	.num_properties		= ARRAY_SIZE(bq2515x_mains_properties),
+	.property_is_writeable	= bq2515x_power_supply_property_is_writeable,
+};
+
+static struct power_supply_desc bq2515x_battery_desc = {
+	.name			= "bq2515x-battery",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property		= bq2515x_battery_get_property,
+	.set_property		= bq2515x_battery_set_property,
+	.properties		= bq2515x_battery_properties,
+	.num_properties		= ARRAY_SIZE(bq2515x_battery_properties),
+	.property_is_writeable	= bq2515x_power_supply_property_is_writeable,
+};
+
+static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x,
+		struct device *dev, struct power_supply_config psy_cfg)
+{
+	bq2515x->mains = devm_power_supply_register(bq2515x->dev,
+						    &bq2515x_mains_desc,
+						    &psy_cfg);
+	if (IS_ERR(bq2515x->mains))
+		return -EINVAL;
+
+	bq2515x->battery = devm_power_supply_register(bq2515x->dev,
+						      &bq2515x_battery_desc,
+						      &psy_cfg);
+	if (IS_ERR(bq2515x->battery))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int bq2515x_hw_init(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	struct power_supply_battery_info bat_info = { };
+
+	ret = bq2515x_disable_watchdog_timers(bq2515x);
+	if (ret)
+		return ret;
+
+	if (bq2515x->init_data.ilim) {
+		ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ilim);
+		if (ret)
+			return ret;
+	}
+
+	ret = power_supply_get_battery_info(bq2515x->mains, &bat_info);
+	if (ret) {
+		dev_warn(bq2515x->dev, "battery info missing, default values will be applied\n");
+
+		bat_info.constant_charge_current_max_ua =
+						BQ2515X_DEFAULT_ICHG_UA;
+
+		bat_info.constant_charge_voltage_max_uv =
+						BQ2515X_DEFAULT_VBAT_REG_UV;
+
+		bat_info.precharge_current_ua =
+						BQ2515X_DEFAULT_IPRECHARGE_UA;
+	}
+
+	ret = bq2515x_set_const_charge_current(bq2515x,
+			bat_info.constant_charge_current_max_ua);
+	if (ret)
+		return ret;
+
+	ret = bq2515x_set_batt_reg(bq2515x,
+			bat_info.constant_charge_voltage_max_uv);
+	if (ret)
+		return ret;
+
+	return bq2515x_set_precharge_current(bq2515x,
+			bat_info.precharge_current_ua);
+}
+
+static int bq2515x_read_properties(struct bq2515x_device *bq2515x)
+{
+	int ret;
+
+	ret = device_property_read_u32(bq2515x->dev,
+				      "input-current-limit-microamp",
+				      &bq2515x->init_data.ilim);
+	if (ret)
+		switch (bq2515x->device_id) {
+		case BQ25150:
+			bq2515x->init_data.ilim = BQ25150_DEFAULT_ILIM_UA;
+			break;
+		case BQ25155:
+			bq2515x->init_data.ilim = BQ25155_DEFAULT_ILIM_UA;
+			break;
+		}
+
+	bq2515x->ac_detect_gpio = devm_gpiod_get_optional(bq2515x->dev,
+						   "ac-detect", GPIOD_IN);
+	if (IS_ERR(bq2515x->ac_detect_gpio)) {
+		ret = PTR_ERR(bq2515x->ac_detect_gpio);
+		if (ret != -ENODEV) {
+			dev_err(bq2515x->dev, "Failed to get ac detect");
+			return ret;
+		}
+		bq2515x->ac_detect_gpio = NULL;
+	}
+
+	bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev,
+						   "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(bq2515x->reset_gpio)) {
+		ret = PTR_ERR(bq2515x->reset_gpio);
+		if (ret != -ENODEV) {
+			dev_err(bq2515x->dev, "Failed to get reset");
+			return ret;
+		}
+		bq2515x->reset_gpio = NULL;
+	}
+
+	bq2515x->powerdown_gpio = devm_gpiod_get_optional(bq2515x->dev,
+						"powerdown", GPIOD_OUT_LOW);
+	if (IS_ERR(bq2515x->powerdown_gpio)) {
+		ret = PTR_ERR(bq2515x->powerdown_gpio);
+		if (ret != -ENODEV) {
+			dev_err(bq2515x->dev, "Failed to get powerdown");
+			return ret;
+		}
+		bq2515x->powerdown_gpio = NULL;
+	}
+
+	bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev,
+						   "charge-enable",
+						   GPIOD_OUT_LOW);
+	if (IS_ERR(bq2515x->ce_gpio)) {
+		ret = PTR_ERR(bq2515x->ce_gpio);
+		if (ret != -ENODEV) {
+			dev_err(bq2515x->dev, "Failed to get ce");
+			return ret;
+		}
+		bq2515x->ce_gpio = NULL;
+	}
+
+	return 0;
+}
+
+static bool bq2515x_volatile_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case BQ2515X_STAT0 ... BQ2515X_FLAG3:
+	case BQ2515X_ADC_VBAT_M ... BQ2515X_ADC_IIN_L:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config bq25150_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register		= BQ2515X_DEVICE_ID,
+	.reg_defaults		= bq25150_reg_defaults,
+	.num_reg_defaults	= ARRAY_SIZE(bq25150_reg_defaults),
+	.cache_type		= REGCACHE_RBTREE,
+	.volatile_reg		= bq2515x_volatile_register,
+};
+
+static const struct regmap_config bq25155_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register		= BQ2515X_DEVICE_ID,
+	.reg_defaults		= bq25155_reg_defaults,
+	.num_reg_defaults	= ARRAY_SIZE(bq25155_reg_defaults),
+	.cache_type		= REGCACHE_RBTREE,
+	.volatile_reg		= bq2515x_volatile_register,
+};
+
+static int bq2515x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct bq2515x_device *bq2515x;
+	struct power_supply_config charger_cfg = {};
+	int ret;
+
+	bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL);
+	if (!bq2515x)
+		return -ENOMEM;
+
+	bq2515x->dev = dev;
+
+	strncpy(bq2515x->model_name, id->name, I2C_NAME_SIZE);
+
+	bq2515x->device_id = id->driver_data;
+
+	switch (bq2515x->device_id) {
+	case BQ25150:
+		bq2515x->regmap = devm_regmap_init_i2c(client,
+						&bq25150_regmap_config);
+		break;
+	case BQ25155:
+		bq2515x->regmap = devm_regmap_init_i2c(client,
+						&bq25155_regmap_config);
+		break;
+	}
+
+	if (IS_ERR(bq2515x->regmap)) {
+		dev_err(dev, "failed to allocate register map\n");
+		return PTR_ERR(bq2515x->regmap);
+	}
+
+	i2c_set_clientdata(client, bq2515x);
+
+	charger_cfg.drv_data = bq2515x;
+	charger_cfg.of_node = dev->of_node;
+
+	ret = bq2515x_read_properties(bq2515x);
+	if (ret) {
+		dev_err(dev, "Failed to read device tree properties %d\n",
+									ret);
+		return ret;
+	}
+
+	ret = bq2515x_power_supply_register(bq2515x, dev, charger_cfg);
+	if (ret) {
+		dev_err(dev, "failed to register power supply\n");
+		return ret;
+	}
+
+	ret = bq2515x_hw_init(bq2515x);
+	if (ret) {
+		dev_err(dev, "Cannot initialize the chip\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id bq2515x_i2c_ids[] = {
+	{ "bq25150", BQ25150, },
+	{ "bq25155", BQ25155, },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids);
+
+static const struct of_device_id bq2515x_of_match[] = {
+	{ .compatible = "ti,bq25150", },
+	{ .compatible = "ti,bq25155", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bq2515x_of_match);
+
+static struct i2c_driver bq2515x_driver = {
+	.driver = {
+		.name = "bq2515x-charger",
+		.of_match_table = bq2515x_of_match,
+	},
+	.probe = bq2515x_probe,
+	.id_table = bq2515x_i2c_ids,
+};
+module_i2c_driver(bq2515x_driver);
+
+MODULE_AUTHOR("Dan Murphy <dmurphy@xxxxxx>");
+MODULE_AUTHOR("Ricardo Rivera-Matos <r-rivera-matos@xxxxxx>");
+MODULE_DESCRIPTION("BQ2515X charger driver");
+MODULE_LICENSE("GPL v2");
-- 
2.26.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux