On 5/28/20 9:43 AM, Andrew F. Davis wrote:
On 5/28/20 10:05 AM, Ricardo Rivera-Matos wrote:
+static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x,
+ int val)
+{
+ int ret;
+ unsigned int pchrgctrl;
+ unsigned int icharge_range;
+ unsigned int precharge_reg_code;
+ u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ u16 precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
Why u16? looks like it gets promoted everywhere it's used anyway.
ACK
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+ if (ret)
+ return ret;
+
+ icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+ if (icharge_range) {
+ precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA;
+ precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
This is a little hard to read when we have a default value overwritten
in an if, it basically hides the else logic, suggest:
if (icharge_range) {
precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA;
precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
} else {
precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
}
ACK. I originally had it as an if/else deal, but I got feedback it was
too verbose. It will stay verbose.
+ }
+ if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA)
+ return -EINVAL;
+
+ precharge_reg_code = val / precharge_multiplier;
+
+ ret = bq2515x_set_charge_disable(bq2515x, 1);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+ BQ2515X_PRECHARGE_MASK, precharge_reg_code);
+ if (ret)
+ return ret;
+
+ return bq2515x_set_charge_disable(bq2515x, 0);
+}
[snip]
+
+static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val)
+{
+ int i = 0;
+ unsigned int array_size = ARRAY_SIZE(bq2515x_ilim_lvl_values);
+
+ if (val >= bq2515x_ilim_lvl_values[array_size - 1]) {
Isn't this check the same as is done in first iteration of the below loop?
Andrew
ACK
+ i = array_size - 1;
+ } else {
+ for (i = array_size - 1; i > 0; i--) {
+ if (val >= bq2515x_ilim_lvl_values[i])
+ break;
+ }
+ }
+ return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i);
+}
+
