Enable support for USB OTG port on Orange Pi Zero Plus 2 (both H3 and H5
variants). As, according to the board schematics, the USB OTG port cannot
provide power to external devices, we set dr_mode to peripheral.
Signed-off-by: Diego Rondini <diego.rondini@xxxxxxxxxxxx>
---
.../boot/dts/sun8i-h3-orangepi-zero-plus2.dts | 23 +++++++++++++++++++
.../sun50i-h5-orangepi-zero-plus2.dts | 23 +++++++++++++++++++
2 files changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
index b8f46e2802fd3..4376767699a47 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -137,3 +137,26 @@ &uart0 {
pinctrl-0 = <&uart0_pa_pins>;
status = "okay";
};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_otg {
+ /*
+ * According to schematics CN1 MicroUSB port can be used to take
+ * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+ * port cannot provide power externally even if the board is powered
+ * via GPIO pins. It thus makes sense to force peripheral mode.
+ */
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index c95a68541309c..d8192a7483e9e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -103,3 +103,26 @@ &uart1 {
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_otg {
+ /*
+ * According to schematics CN1 MicroUSB port can be used to take
+ * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+ * port cannot provide power externally even if the board is powered
+ * via GPIO pins. It thus makes sense to force peripheral mode.
+ */
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
--
2.25.4
