On Thu, May 14, 2020 at 12:30:54PM -0500, Dan Murphy wrote: > Add a dt binding for the TI dp83822 ethernet phy device. > > CC: Rob Herring <robh+dt@xxxxxxxxxx> > Signed-off-by: Dan Murphy <dmurphy@xxxxxx> > --- > .../devicetree/bindings/net/ti,dp83822.yaml | 49 +++++++++++++++++++ > 1 file changed, 49 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/ti,dp83822.yaml > > diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml > new file mode 100644 > index 000000000000..60afd43ad3b6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml > @@ -0,0 +1,49 @@ > +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) > +# Copyright (C) 2020 Texas Instruments Incorporated > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/net/ti,dp83822.yaml#"; > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > + > +title: TI DP83822 ethernet PHY > + > +allOf: > + - $ref: "ethernet-controller.yaml#" Not an ethernet controller. Drop. (The ethernet-phy.yaml schema will be applied based on node name). > + > +maintainers: > + - Dan Murphy <dmurphy@xxxxxx> > + > +description: | > + The DP83822 is a low-power, single-port, 10/100 Mbps Ethernet PHY. It > + provides all of the physical layer functions needed to transmit and receive > + data over standard, twisted-pair cables or to connect to an external, > + fiber-optic transceiver. Additionally, the DP83822 provides flexibility to > + connect to a MAC through a standard MII, RMII, or RGMII interface > + > + Specifications about the charger can be found at: > + http://www.ti.com/lit/ds/symlink/dp83822i.pdf > + > +properties: > + reg: > + maxItems: 1 > + > + ti,signal-polarity-low: What signal? > + type: boolean > + description: | > + DP83822 PHY in Fiber mode only. > + Sets the DP83822 to detect a link drop condition when the signal goes > + high. If not set then link drop will occur when the signal goes low. The naming is not clear that low is for link drop. So maybe: ti,link-loss-low Rob
