Add binding for Loongson PCH MSI controller. Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> -- v5: Add range check for msi-base-vec & msi-num-vecs --- .../loongson,pch-msi.yaml | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml new file mode 100644 index 000000000000..1a5ebbdd219a --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/interrupt-controller/loongson,pch-msi.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: Loongson PCH MSI Controller + +maintainers: + - Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx> + +description: + This interrupt controller is found in the Loongson LS7A family of PCH for + transforming interrupts from PCIe MSI into HyperTransport vectorized + interrupts. + +properties: + compatible: + const: loongson,pch-msi-1.0 + + reg: + maxItems: 1 + + loongson,msi-base-vec: + description: + u32 value of the base of parent HyperTransport vector allocated + to PCH MSI. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 255 + + loongson,msi-num-vecs: + description: + u32 value of the number of parent HyperTransport vectors allocated + to PCH MSI. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 1 + maximum: 256 + + msi-controller: true + +required: + - compatible + - reg + - msi-controller + - loongson,msi-base-vec + - loongson,msi-num-vecs + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + msi: msi-controller@2ff00000 { + compatible = "loongson,pch-msi-1.0"; + reg = <0x2ff00000 0x4>; + msi-controller; + loongson,msi-base-vec = <64>; + loongson,msi-num-vecs = <64>; + interrupt-parent = <&htvec>; + }; +... -- 2.27.0.rc0
