Quoting Alex Elder (2014-05-20 05:52:38) > Add a flag that tracks whether a clock has already been initialized. > This will be used by the next patch to avoid initializing a clock > more than once when it's listed as a prerequisite. > > Signed-off-by: Alex Elder <elder@xxxxxxxxxx> > --- > drivers/clk/bcm/clk-kona.c | 17 +++++++++++++++-- > drivers/clk/bcm/clk-kona.h | 7 +++++++ > 2 files changed, 22 insertions(+), 2 deletions(-) > > diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c > index d603c4e..d8a7f38 100644 > --- a/drivers/clk/bcm/clk-kona.c > +++ b/drivers/clk/bcm/clk-kona.c > @@ -27,6 +27,9 @@ > #define CCU_ACCESS_PASSWORD 0xA5A500 > #define CLK_GATE_DELAY_LOOP 2000 > > +#define clk_is_initialized(_clk) FLAG_TEST((_clk), KONA, INITIALIZED) > +#define clk_set_initialized(_clk) FLAG_SET((_clk), KONA, INITIALIZED) > + > /* Bitfield operations */ > > /* Produces a mask of set bits covering a range of a 32-bit value */ > @@ -1194,13 +1197,23 @@ static bool __peri_clk_init(struct kona_clk *bcm_clk) > > static bool __kona_clk_init(struct kona_clk *bcm_clk) > { > + bool ret; > + > + if (clk_is_initialized(bcm_clk)) > + return true; > + > switch (bcm_clk->type) { > case bcm_clk_peri: > - return __peri_clk_init(bcm_clk); > + ret = __peri_clk_init(bcm_clk); Hi Alex, Going through this code, it's a bit hard to keep up ;-) Does the call to __peri_clk_init enable the prereq clocks? If so, is their clk->prepare_count and clk->enable_count properly incremented? Thanks, Mike > + break; > default: > + ret = false; > BUG(); > } > - return -EINVAL; > + if (ret) > + clk_set_initialized(bcm_clk); > + > + return ret; > } > > /* Set a CCU and all its clocks into their desired initial state */ > diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h > index 2537b30..10e238d 100644 > --- a/drivers/clk/bcm/clk-kona.h > +++ b/drivers/clk/bcm/clk-kona.h > @@ -406,6 +406,7 @@ struct kona_clk { > struct clk_init_data init_data; /* includes name of this clock */ > struct ccu_data *ccu; /* ccu this clock is associated with */ > enum bcm_clk_type type; > + u32 flags; /* BCM_CLK_KONA_FLAGS_* below */ > union { > void *data; > struct peri_clk_data *peri; > @@ -414,6 +415,12 @@ struct kona_clk { > #define to_kona_clk(_hw) \ > container_of(_hw, struct kona_clk, hw) > > +/* > + * Kona clock flags: > + * INITIALIZED clock has been initialized already > + */ > +#define BCM_CLK_KONA_FLAGS_INITIALIZED ((u32)1 << 0) /* Clock initialized */ > + > /* Initialization macro for an entry in a CCU's kona_clks[] array. */ > #define KONA_CLK(_ccu_name, _clk_name, _type) \ > { \ > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html