Re: [PATCH v5 06/11] i2c: designware: Add Baytrail sem config DW I2C platform dependency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 27, 2020 at 06:30:41PM +0300, Serge Semin wrote:
> Currently Intel Baytrail I2C semaphore is a feature of the DW APB I2C
> platform driver. It's a bit confusing to see it's config in the menu at
> some separated place with no reference to the platform code. Let's move the
> config definition to be below the I2C_DESIGNWARE_PLATFORM config and mark
> it with "depends on I2C_DESIGNWARE_PLATFORM" statement. By doing so the
> config menu will display the feature right below the DW I2C platform
> driver item and will indent it to the right so signifying its belonging.

After clarification Serge gave, it makes sense.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

> Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
> Cc: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
> Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
> Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Cc: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: linux-mips@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> 
> ---
> 
> Changelog v3:
> - Replace if-endif clause around the I2C_DESIGNWARE_BAYTRAIL config
>   with "depends on" operator.
> ---
>  drivers/i2c/busses/Kconfig | 23 ++++++++++++-----------
>  1 file changed, 12 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 7f92f6a96042..7cd279c36898 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -549,20 +549,10 @@ config I2C_DESIGNWARE_PLATFORM
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called i2c-designware-platform.
>  
> -config I2C_DESIGNWARE_PCI
> -	tristate "Synopsys DesignWare PCI"
> -	depends on PCI
> -	select I2C_DESIGNWARE_CORE
> -	help
> -	  If you say yes to this option, support will be included for the
> -	  Synopsys DesignWare I2C adapter. Only master mode is supported.
> -
> -	  This driver can also be built as a module.  If so, the module
> -	  will be called i2c-designware-pci.
> -
>  config I2C_DESIGNWARE_BAYTRAIL
>  	bool "Intel Baytrail I2C semaphore support"
>  	depends on ACPI
> +	depends on I2C_DESIGNWARE_PLATFORM
>  	depends on (I2C_DESIGNWARE_PLATFORM=m && IOSF_MBI) || \
>  		   (I2C_DESIGNWARE_PLATFORM=y && IOSF_MBI=y)
>  	help
> @@ -572,6 +562,17 @@ config I2C_DESIGNWARE_BAYTRAIL
>  	  the platform firmware controlling it. You should say Y if running on
>  	  a BayTrail system using the AXP288.
>  
> +config I2C_DESIGNWARE_PCI
> +	tristate "Synopsys DesignWare PCI"
> +	depends on PCI
> +	select I2C_DESIGNWARE_CORE
> +	help
> +	  If you say yes to this option, support will be included for the
> +	  Synopsys DesignWare I2C adapter. Only master mode is supported.
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called i2c-designware-pci.
> +
>  config I2C_DIGICOLOR
>  	tristate "Conexant Digicolor I2C driver"
>  	depends on ARCH_DIGICOLOR || COMPILE_TEST
> -- 
> 2.26.2
> 

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux