This set of patches properly documents the micrel ks8851 spi ethernet controller, converts to devm_regulator_get_optional() to make error paths slightly simpler, and finally adds supports for another optional regulator and a reset gpio. This allows me to use the ks8851 on my MSM8960 CDP board. Changes since v1: * Dropped vendor prefix patch as that should go through DT tree Stephen Boyd (4): devicetree: bindings: Properly document micrel ks8851 SPI chips net: ks8851: Use devm_regulator_get_optional() net: ks8851: Add optional vdd_io regulator and reset gpio net: ks8851: Add of match table .../devicetree/bindings/net/micrel-ks8851.txt | 15 ++++- drivers/net/ethernet/micrel/ks8851.c | 71 +++++++++++++++++++--- 2 files changed, 74 insertions(+), 12 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html