Re: [PATCH v4 10/11] i2c: designware: Move reg-space remapping into a dedicated function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 27, 2020 at 03:01:10PM +0300, Serge Semin wrote:
> This is a preparation patch before adding a quirk with custom registers
> map creation required for the Baikal-T1 System I2C support.

Looks good. Though one nit below.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

> Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
> Cc: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
> Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: linux-mips@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> 
> ---
> 
> Changelog v3:
> - This is a new patch, which has been created due to declining the
>   glue-layer approach.
> 
> Changelog v4:
> - Use PTR_ERR_OR_ZERO() helper in the bt1_i2c_request_regs() method.
> - Discard devm_platform_get_and_ioremap_resource() utilization.
> ---
>  drivers/i2c/busses/i2c-designware-platdrv.c | 18 +++++++++++++-----
>  1 file changed, 13 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
> index ad292de2d260..061c8d506c7c 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -108,6 +108,15 @@ static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
>  		pm_runtime_put_noidle(dev->dev);
>  }
>  
> +static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev->dev);
> +
> +	dev->base = devm_platform_ioremap_resource(pdev, 0);
> +
> +	return PTR_ERR_OR_ZERO(dev->base);
> +}
> +
>  static int dw_i2c_plat_probe(struct platform_device *pdev)
>  {
>  	struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
> @@ -125,15 +134,14 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  

>  	dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev);

It's related to previous patch, but I just realized that '|' is not needed
here. Care to amend in the previous patch?

> -
> -	dev->base = devm_platform_ioremap_resource(pdev, 0);
> -	if (IS_ERR(dev->base))
> -		return PTR_ERR(dev->base);
> -
>  	dev->dev = &pdev->dev;
>  	dev->irq = irq;
>  	platform_set_drvdata(pdev, dev);
>  
> +	ret = dw_i2c_plat_request_regs(dev);
> +	if (ret)
> +		return ret;
> +
>  	dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
>  	if (IS_ERR(dev->rst))
>  		return PTR_ERR(dev->rst);
> -- 
> 2.26.2
> 

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux