From: fugang.duan@xxxxxxx Date: Tue, 26 May 2020 00:27:09 +0800 > From: Fugang Duan <fugang.duan@xxxxxxx> > > The commit da722186f654 (net: fec: set GPR bit on suspend by > DT configuration) set the GPR reigster offset and bit in driver > for wol feature support. > > It brings trouble to enable wol feature on imx6sx/imx6ul/imx7d > platforms that have multiple ethernet instances with different > GPR bit for stop mode control. So the patch set is to move GPR > register offset and bit define into DT, and enable imx6q/imx6dl > imx6qp/imx6sx/imx6ul/imx7d stop mode support. > > Currently, below NXP i.MX boards support wol: > - imx6q/imx6dl/imx6qp sabresd > - imx6sx sabreauto > - imx7d sdb > > imx6q/imx6dl/imx6qp sabresd board dts file miss the property > "fsl,magic-packet;", so patch#4 is to add the property for stop > mode support. > > > v1 -> v2: > - driver: switch back to store the quirks bitmask in driver_data > - dt-bindings: rename 'gpr' property string to 'fsl,stop-mode' > - imx6/7 dtsi: add imx6sx/imx6ul/imx7d ethernet stop mode property > v2 -> v3: > - driver: suggested by Sascha Hauer, use a struct fec_devinfo for > abstracting differences between different hardware variants, > it can give more freedom to describe the differences. > - imx6/7 dtsi: correct one typo pointed out by Andrew. > > Thanks Martin, Andrew and Sascha Hauer for the review. Series applied to net-next, thanks.
