Re: [PATCH v7 2/4] dt-bindings: phy: qcom,qmp-usb3-dp: Add dt bindings for USB3 DP PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 15, 2020 at 08:09:16AM +0530, Sandeep Maheswaram wrote:
> Split out the dt bindings for USB3 DP PHY from qcom,qmp bindings
> for modularity.
> 
> Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/phy/qcom,qmp-phy.yaml      |  51 +++-----
>  .../bindings/phy/qcom,qmp-usb3-dp-phy.yaml         | 135 +++++++++++++++++++++
>  2 files changed, 150 insertions(+), 36 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> index dcdb014..973b2d1 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> @@ -27,21 +27,13 @@ properties:
>        - qcom,sdm845-qhp-pcie-phy
>        - qcom,sdm845-qmp-pcie-phy
>        - qcom,sdm845-qmp-ufs-phy
> -      - qcom,sdm845-qmp-usb3-phy
>        - qcom,sdm845-qmp-usb3-uni-phy
>        - qcom,sm8150-qmp-ufs-phy
>        - qcom,sm8250-qmp-ufs-phy
>  
>    reg:
> -    minItems: 1
>      items:
>        - description: Address and length of PHY's common serdes block.
> -      - description: Address and length of the DP_COM control block.
> -
> -  reg-names:
> -    items:
> -      - const: reg-base
> -      - const: dp_com
>  
>    "#clock-cells":
>       enum: [ 1, 2 ]
> @@ -110,7 +102,6 @@ allOf:
>          compatible:
>            contains:
>              enum:
> -              - qcom,sdm845-qmp-usb3-phy
>                - qcom,sdm845-qmp-usb3-uni-phy
>      then:
>        properties:
> @@ -284,51 +275,39 @@ allOf:
>          reset-names:
>            items:
>              - const: phy
> -  - if:
> -      properties:
> -        compatible:
> -          contains:
> -            const: qcom,sdm845-qmp-usb3-phy
> -    then:
> -      required:
> -        - reg-names
>  
>  examples:
>    - |
>      #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> -    usb_1_qmpphy: phy-wrapper@88e9000 {
> -        compatible = "qcom,sdm845-qmp-usb3-phy";
> -        reg = <0 0x088e9000 0 0x18c>,
> -              <0 0x088e8000 0 0x10>;
> -        reg-names = "reg-base", "dp_com";
> +    usb_2_qmpphy: phy-wrapper@88eb000 {
> +        compatible = "qcom,sdm845-qmp-usb3-uni-phy";
> +        reg = <0 0x088eb000 0 0x18c>;
>          #clock-cells = <1>;
>          #address-cells = <2>;
>          #size-cells = <2>;
>  
> -        clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
> +        clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >,
>                   <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> -                 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> -                 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> +                 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
> +                 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
>          clock-names = "aux", "cfg_ahb", "ref", "com_aux";
>  
> -        resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
> -                 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
> +        resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
> +                 <&gcc GCC_USB3_PHY_SEC_BCR>;
>          reset-names = "phy", "common";
>  
>          vdda-phy-supply = <&vdda_usb2_ss_1p2>;
>          vdda-pll-supply = <&vdda_usb2_ss_core>;
>  
> -        usb_1_ssphy: phy@88e9200 {
> -                reg = <0 0x088e9200 0 0x128>,
> -                      <0 0x088e9400 0 0x200>,
> -                      <0 0x088e9c00 0 0x218>,
> -                      <0 0x088e9600 0 0x128>,
> -                      <0 0x088e9800 0 0x200>,
> -                      <0 0x088e9a00 0 0x100>;
> +        usb_2_ssphy: phy@88eb200 {
> +                reg = <0 0x088eb200 0 0x128>,
> +                      <0 0x088eb400 0 0x1fc>,
> +                      <0 0x088eb800 0 0x218>,
> +                      <0 0x088eb600 0 0x70>;
>                  #clock-cells = <0>;
>                  #phy-cells = <0>;
> -                clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +                clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
>                  clock-names = "pipe0";
> -                clock-output-names = "usb3_phy_pipe_clk_src";
> +                clock-output-names = "usb3_uni_phy_pipe_clk_src";
>              };
>          };
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> new file mode 100644
> index 0000000..6055786
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
> @@ -0,0 +1,135 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Qualcomm QMP USB3 DP PHY controller
> +
> +maintainers:
> +  - Manu Gautam <mgautam@xxxxxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const:
> +      qcom,sdm845-qmp-usb3-phy
> +  reg:
> +    items:
> +      - description: Address and length of PHY's common serdes block.
> +      - description: Address and length of the DP_COM control block.
> +
> +  reg-names:
> +    items:
> +      - const: reg-base
> +      - const: dp_com
> +
> +  "#clock-cells":
> +     enum: [ 1, 2 ]
> +
> +  "#address-cells":
> +    enum: [ 1, 2 ]
> +
> +  "#size-cells":
> +    enum: [ 1, 2 ]
> +
> +  clocks:
> +    items:
> +      - description: Phy aux clock.
> +      - description: Phy config clock.
> +      - description: 19.2 MHz ref clk.
> +      - description: Phy common block aux clock.
> +
> +  clock-names:
> +    items:
> +      - const: aux
> +      - const: cfg_ahb
> +      - const: ref
> +      - const: com_aux
> +
> +  resets:
> +    items:
> +      - description: reset of phy block.
> +      - description: phy common block reset.
> +
> +  reset-names:
> +    items:
> +      - const: phy
> +      - const: common
> +
> +  vdda-phy-supply:
> +    description:
> +        Phandle to a regulator supply to PHY core block.
> +
> +  vdda-pll-supply:
> +    description:
> +        Phandle to 1.8V regulator supply to PHY refclk pll block.
> +
> +  vddp-ref-clk-supply:
> +    description:
> +        Phandle to a regulator supply to any specific refclk
> +        pll block.
> +
> +#Required nodes:
> +patternProperties:
> +  "^phy@[0-9a-f]+$":
> +    type: object
> +    description:
> +      Each device node of QMP phy is required to have as many child nodes as
> +      the number of lanes the PHY has.

Probably not a new problem, but where are the child node properties 
documented? They need to be added before you duplicate this problem.

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - "#clock-cells"
> +  - "#address-cells"
> +  - "#size-cells"
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - vdda-phy-supply
> +  - vdda-pll-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> +    usb_1_qmpphy: phy-wrapper@88e9000 {
> +        compatible = "qcom,sdm845-qmp-usb3-phy";
> +        reg = <0 0x088e9000 0 0x18c>,
> +              <0 0x088e8000 0 0x10>;
> +        reg-names = "reg-base", "dp_com";
> +        #clock-cells = <1>;
> +        #address-cells = <2>;
> +        #size-cells = <2>;

You're missing 'ranges', so the child addresses are not translatable.

You could also reduce everything to 1 cell as they are contained within 
the parent's range.

> +
> +        clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
> +                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
> +                 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +                 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> +        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
> +
> +        resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
> +                 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
> +        reset-names = "phy", "common";
> +
> +        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
> +        vdda-pll-supply = <&vdda_usb2_ss_core>;
> +
> +        usb_1_ssphy: phy@88e9200 {
> +                reg = <0 0x088e9200 0 0x128>,
> +                      <0 0x088e9400 0 0x200>,
> +                      <0 0x088e9c00 0 0x218>,
> +                      <0 0x088e9600 0 0x128>,
> +                      <0 0x088e9800 0 0x200>,
> +                      <0 0x088e9a00 0 0x100>;
> +                #clock-cells = <0>;
> +                #phy-cells = <0>;
> +                clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +                clock-names = "pipe0";
> +                clock-output-names = "usb3_phy_pipe_clk_src";
> +            };
> +        };
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux