LDO1 and LDO2 settings are wrong and case the voltage to go above the maximum level of 2.15V permitted by the SoC to 3.0V. This patch is based on work done on the i.MX8M Mini-EVK which utilizes the same fix. Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit") Signed-off-by: Adam Ford <aford173@xxxxxxxxx> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi index fb0137a8611c..94911b1707ef 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi @@ -136,7 +136,7 @@ ldo1_reg: LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <3000000>; + regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; @@ -144,7 +144,7 @@ ldo2_reg: LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; regulator-always-on; -- 2.17.1