Update the document to be consistent in case when using "LED". This acronym should be capital throughout the document. Acked-by: Pavel Machek <pavel@xxxxxx> Acked-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx> Signed-off-by: Dan Murphy <dmurphy@xxxxxx> --- Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt index 1b66a413fb9d..bfe2805c5534 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt @@ -1,4 +1,4 @@ -Binding for TI/National Semiconductor LP55xx Led Drivers +Binding for TI/National Semiconductor LP55xx LED Drivers Required properties: - compatible: one of @@ -12,8 +12,8 @@ Required properties: - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external) Each child has own specific current settings -- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected) -- max-cur: Maximun current at each led channel. +- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected) +- max-cur: Maximun current at each LED channel. Optional properties: - enable-gpio: GPIO attached to the chip's enable pin -- 2.25.1
