Hi,
> -----Original Message-----
> From: Guenter Roeck <groeck7@xxxxxxxxx> On Behalf Of Guenter Roeck
> Sent: Tuesday, May 26, 2020 5:12 PM
> To: Sandipan Patra <spatra@xxxxxxxxxx>; Thierry Reding
> <treding@xxxxxxxxxx>; Jonathan Hunter <jonathanh@xxxxxxxxxx>; u.kleine-
> koenig@xxxxxxxxxxxxxx; kamil@xxxxxxxxx; jdelvare@xxxxxxxx;
> robh+dt@xxxxxxxxxx
> Cc: Bibek Basu <bbasu@xxxxxxxxxx>; Bitan Biswas <bbiswas@xxxxxxxxxx>;
> linux-pwm@xxxxxxxxxxxxxxx; linux-hwmon@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-tegra@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH 1/2] hwmon: pwm-fan: Add profile support and add remove
> module support
>
> External email: Use caution opening links or attachments
>
>
> On 5/25/20 10:06 PM, Sandipan Patra wrote:
> > This change has 2 parts:
> > 1. Add support for profiles mode settings.
> > This allows different fan settings for trip point temp/hyst/pwm.
> > T194 has multiple fan-profiles support.
> >
> > 2. Add pwm-fan remove support. This is essential since the config is
> > tristate capable.
> >
> > Signed-off-by: Sandipan Patra <spatra@xxxxxxxxxx>
> > ---
> > drivers/hwmon/pwm-fan.c | 112
> > ++++++++++++++++++++++++++++++++++++++++++------
> > 1 file changed, 100 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c index
> > 30b7b3e..26db589 100644
> > --- a/drivers/hwmon/pwm-fan.c
> > +++ b/drivers/hwmon/pwm-fan.c
>
> [ ... ]
>
> >
> > +static int pwm_fan_remove(struct platform_device *pdev) {
> > + struct pwm_fan_ctx *ctx = platform_get_drvdata(pdev);
> > + struct pwm_args args;
> > +
> > + if (!ctx)
> > + return -EINVAL;
> > +
> > + if (IS_ENABLED(CONFIG_THERMAL))
> > + thermal_cooling_device_unregister(ctx->cdev);
> > +
> > + pwm_get_args(ctx->pwm, &args);
> > + pwm_config(ctx->pwm, 0, args.period);
> > + pwm_disable(ctx->pwm);
> > +
> > + return 0;
> > +}
> > +
>
> I don't think you actually tested this. I would suggest to make yourself familiar
> with 'devm' functions and their use, and then resubmit.
>
Thanks Guenter.
I missed to mention about devm while unregistering the cooling device.
That would definitely cause a mistake in code. I am noting it for further patch.
For a better clarity, I will push next version of this patch to handle only multiple profiles support.
"remove fan module" will be supported by a separate patch altogether.
Thanks & Regards,
Sandipan
> Thanks,
> Guenter
