Hi. The first part is to document DT bindings for Keem Bay eMMC PHY. The second is the driver file, loosely based on phy-rockchip-emmc.c and phy-intel-emmc.c. The latter is not being reused as there are quite a number of differences i.e. registers offset, supported clock rates, bitfield to set. The patch was tested with Keem Bay evaluation module board. Thank you. Best regards, Zainie Changes since v1: - Rework phy-keembay-emmc.c to make it similar to phy-intel-emmc.c. - Use regmap_mmio, and remove reference to intel,syscon. - Use node name phy@.... - Update license i.e. use dual license. Wan Ahmad Zainie (2): dt-bindings: phy: intel: Add Keem Bay eMMC PHY bindings phy: intel: Add Keem Bay eMMC PHY support .../bindings/phy/intel,keembay-emmc-phy.yaml | 45 +++ drivers/phy/intel/Kconfig | 8 + drivers/phy/intel/Makefile | 1 + drivers/phy/intel/phy-keembay-emmc.c | 321 ++++++++++++++++++ 4 files changed, 375 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/intel,keembay-emmc-phy.yaml create mode 100644 drivers/phy/intel/phy-keembay-emmc.c -- 2.17.1
