> From: Robin Gong <yibin.gong@xxxxxxx> > Sent: Thursday, May 21, 2020 10:18 PM > > Correct ldo1 voltage range from wrong high group(3.0v~3.3v) to low group > (1.6v~1.9v) because the ldo1 should be 1.8v. Actually, two voltage groups have > been supported at bd718x7-regulator driver, hence, just corrrect the voltage > range to 1.6v~3.3v. For ldo2@0.8v, correct voltage range too. > Otherwise, ldo1 would be kept @3.0v and ldo2@0.9v which violate i.mx8mm > datasheet as the below warning log in kernel: > > [ 0.995524] LDO1: Bringing 1800000uV into 3000000-3000000uV > [ 0.999196] LDO2: Bringing 800000uV into 900000-900000uV > > Signed-off-by: Robin Gong <yibin.gong@xxxxxxx> Reviewed-by: Dong Aisheng <aisheng.dong@xxxxxxx> Regards Aisheng
