CP0 config register may indicate whether write-through merging
is allowed. Currently there are two types of the merging available:
SysAD Valid and Full modes. Whether each of them are supported by
the core is implementation dependent. Moreover whether the ability
to change the mode also depends on the chip family instance. Taking
into account all of this we created a dedicated mm_config() method
to detect and enable merging if it's supported. It is called for
MIPS-type processors at CPU-probe stage and attempts to detect whether
the write merging is available. If it's known to be supported and
switchable, then switch on the full mode. Otherwise just perform the
CP0.Config.MM field analysis.
In addition there are platforms like InterAptiv/ProAptiv, which do have
the MM bit field set by default, but having write-through cacheing
unsupported makes write-merging also unsupported. In this case we just
ignore the MM field value.
Co-developed-by: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Cc: Paul Burton <paulburton@xxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
Changelog v3:
- Replace /* fall through */ with fallthrough macro.
---
arch/mips/include/asm/cpu-features.h | 8 +++++
arch/mips/include/asm/cpu.h | 4 ++-
arch/mips/include/asm/mipsregs.h | 3 ++
arch/mips/kernel/cpu-probe.c | 48 ++++++++++++++++++++++++++++
4 files changed, 62 insertions(+), 1 deletion(-)
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 556b460f31d8..fdf8e6f5964f 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -635,6 +635,14 @@
# endif
#endif
+#ifndef cpu_has_mm_sysad
+# define cpu_has_mm_sysad __opt(MIPS_CPU_MM_SYSAD)
+#endif
+
+#ifndef cpu_has_mm_full
+# define cpu_has_mm_full __opt(MIPS_CPU_MM_FULL)
+#endif
+
/*
* Guest capabilities
*/
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 2e2035a13a55..bda21b8dba66 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -418,7 +418,9 @@ enum cpu_type_enum {
#define MIPS_CPU_MT_PER_TC_PERF_COUNTERS \
BIT_ULL(56) /* CPU has perf counters implemented per TC (MIPSMT ASE) */
#define MIPS_CPU_MMID BIT_ULL(57) /* CPU supports MemoryMapIDs */
-#define MIPS_CPU_MAC_2008_ONLY BIT_ULL(58) /* CPU Only support MAC2008 Fused multiply-add instruction */
+#define MIPS_CPU_MM_SYSAD BIT_ULL(58) /* CPU supports write-through SysAD Valid merge */
+#define MIPS_CPU_MM_FULL BIT_ULL(59) /* CPU supports write-through full merge */
+#define MIPS_CPU_MAC_2008_ONLY BIT_ULL(60) /* CPU Only support MAC2008 Fused multiply-add instruction */
/*
* CPU ASE encodings
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 796fe47cfd17..b1c761279b13 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -563,6 +563,9 @@
#define MIPS_CONF_MT_FTLB (_ULCAST_(4) << 7)
#define MIPS_CONF_AR (_ULCAST_(7) << 10)
#define MIPS_CONF_AT (_ULCAST_(3) << 13)
+#define MIPS_CONF_MM (_ULCAST_(3) << 17)
+#define MIPS_CONF_MM_SYSAD (_ULCAST_(1) << 17)
+#define MIPS_CONF_MM_FULL (_ULCAST_(2) << 17)
#define MIPS_CONF_M (_ULCAST_(1) << 31)
/*
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index cd4776faa9a5..4c29ea5aaadf 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -672,6 +672,52 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags)
return 0;
}
+static int mm_config(struct cpuinfo_mips *c)
+{
+ unsigned int config0, update, mm;
+
+ config0 = read_c0_config();
+ mm = config0 & MIPS_CONF_MM;
+
+ /*
+ * It's implementation dependent what type of write-merge is supported
+ * and whether it can be enabled/disabled. If it is settable lets make
+ * the merging allowed by default. Some platforms might have
+ * write-through caching unsupported. In this case just ignore the
+ * CP0.Config.MM bit field value.
+ */
+ switch (c->cputype) {
+ case CPU_24K:
+ case CPU_34K:
+ case CPU_74K:
+ case CPU_P5600:
+ case CPU_P6600:
+ c->options |= MIPS_CPU_MM_FULL;
+ update = MIPS_CONF_MM_FULL;
+ break;
+ case CPU_1004K:
+ case CPU_1074K:
+ case CPU_INTERAPTIV:
+ case CPU_PROAPTIV:
+ mm = 0;
+ fallthrough;
+ default:
+ update = 0;
+ break;
+ }
+
+ if (update) {
+ config0 = (config0 & ~MIPS_CONF_MM) | update;
+ write_c0_config(config0);
+ } else if (mm == MIPS_CONF_MM_SYSAD) {
+ c->options |= MIPS_CPU_MM_SYSAD;
+ } else if (mm == MIPS_CONF_MM_FULL) {
+ c->options |= MIPS_CPU_MM_FULL;
+ }
+
+ return 0;
+}
+
static inline unsigned int decode_config0(struct cpuinfo_mips *c)
{
unsigned int config0;
@@ -1763,6 +1809,8 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
spram_config();
+ mm_config(c);
+
switch (__get_cpu_type(c->cputype)) {
case CPU_M5150:
case CPU_P5600:
--
2.25.1
