On 5/19/2020 9:30 PM, Hamish Martin wrote:
> These error messages are output when booting on a BCM HR2 system:
> GIC: PPI11 is secure or misconfigured
> GIC: PPI13 is secure or misconfigured
>
> Per ARM documentation these interrupts are triggered on a rising edge.
> See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1,
> Section 3.3.8 Interrupt Configuration Registers.
>
> The same issue was resolved for NSP systems in commit 5f1aa51c7a1e
> ("ARM: dts: NSP: Fix PPI interrupt types").
>
> Signed-off-by: Hamish Martin <hamish.martin@xxxxxxxxxxxxxxxxxxx>
> ---
Applied to devicetree/fixes, please copy
bcm-kernel-feedback-list@xxxxxxxxxxxx so we can have our CI pick up this
patch. Thanks!
--
Florian
