The N factor for PLL6 counts from 1 to 32, as specified in the A23
manual, and shown in Allwinner's original code.
This patch fixes the N factor in the clock driver, as well as the
comment describing it.
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
drivers/clk/sunxi/clk-sunxi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index b2c6d12..6500a1b 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -198,7 +198,7 @@ static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate,
/**
* sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6
* PLL6 rate is calculated as follows
- * rate = parent_rate * n * (k + 1) / 2
+ * rate = parent_rate * (n + 1) * (k + 1) / 2
* parent_rate is always 24Mhz
*/
@@ -225,7 +225,7 @@ static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate,
if (*k > 3)
*k = 3;
- *n = DIV_ROUND_UP(div, (*k+1));
+ *n = DIV_ROUND_UP(div, (*k+1)) - 1;
}
/**
@@ -434,6 +434,7 @@ static struct clk_factors_config sun6i_a31_pll6_config = {
.nwidth = 5,
.kshift = 4,
.kwidth = 2,
+ .n_from_one = 1,
};
static struct clk_factors_config sun4i_apb1_config = {
--
2.0.0.rc2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
