ComboPhy subsystem provides PHY support to various controllers, viz. PCIe, SATA and EMAC. Adding YAML schemas for the same. Signed-off-by: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- Changes on v9: No Change Changes on v8: No Change. Changes on v7: No Change. Changes on v6: Add Reviewed-by: Rob Herring <robh@xxxxxxxxxx> .../devicetree/bindings/phy/intel,combo-phy.yaml | 101 +++++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml new file mode 100644 index 000000000000..347d0cdfb80d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel ComboPhy Subsystem + +maintainers: + - Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx> + +description: | + Intel Combophy subsystem supports PHYs for PCIe, EMAC and SATA + controllers. A single Combophy provides two PHY instances. + +properties: + $nodename: + pattern: "combophy(@.*|-[0-9a-f])*$" + + compatible: + items: + - const: intel,combophy-lgm + - const: intel,combo-phy + + clocks: + maxItems: 1 + + reg: + items: + - description: ComboPhy core registers + - description: PCIe app core control registers + + reg-names: + items: + - const: core + - const: app + + resets: + maxItems: 4 + + reset-names: + items: + - const: phy + - const: core + - const: iphy0 + - const: iphy1 + + intel,syscfg: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: Chip configuration registers handle and ComboPhy instance id + + intel,hsio: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: HSIO registers handle and ComboPhy instance id on NOC + + intel,aggregation: + type: boolean + description: | + Specify the flag to configure ComboPHY in dual lane mode. + + intel,phy-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Mode of the two phys in ComboPhy. + See dt-bindings/phy/phy.h for values. + + "#phy-cells": + const: 1 + +required: + - compatible + - clocks + - reg + - reg-names + - intel,syscfg + - intel,hsio + - intel,phy-mode + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + combophy@d0a00000 { + compatible = "intel,combophy-lgm", "intel,combo-phy"; + clocks = <&cgu0 1>; + #phy-cells = <1>; + reg = <0xd0a00000 0x40000>, + <0xd0a40000 0x1000>; + reg-names = "core", "app"; + resets = <&rcu0 0x50 6>, + <&rcu0 0x50 17>, + <&rcu0 0x50 23>, + <&rcu0 0x50 24>; + reset-names = "phy", "core", "iphy0", "iphy1"; + intel,syscfg = <&sysconf 0>; + intel,hsio = <&hsiol 0>; + intel,phy-mode = <PHY_TYPE_PCIE>; + intel,aggregation; + }; -- 2.11.0
