> Subject: RE: [PATCH V2] dt-bindings: clock: Convert i.MX7D clock to > json-schema > > > From: Anson Huang <Anson.Huang@xxxxxxx> > > Sent: Monday, May 18, 2020 10:53 PM > > > > Convert the i.MX7D clock binding to DT schema format using json-schema. > > > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> > > --- > > Changes since V1: > > - Update maintainer's e-mail address. > > --- > > .../devicetree/bindings/clock/imx7d-clock.txt | 13 ----- > > .../devicetree/bindings/clock/imx7d-clock.yaml | 64 > > ++++++++++++++++++++++ > > 2 files changed, 64 insertions(+), 13 deletions(-) delete mode > > 100644 Documentation/devicetree/bindings/clock/imx7d-clock.txt > > create mode 100644 > > Documentation/devicetree/bindings/clock/imx7d-clock.yaml > > > > diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.txt > > b/Documentation/devicetree/bindings/clock/imx7d-clock.txt > > deleted file mode 100644 > > index 9d3026d..0000000 > > --- a/Documentation/devicetree/bindings/clock/imx7d-clock.txt > > +++ /dev/null > > @@ -1,13 +0,0 @@ > > -* Clock bindings for Freescale i.MX7 Dual > > - > > -Required properties: > > -- compatible: Should be "fsl,imx7d-ccm" > > -- reg: Address and length of the register set > > -- #clock-cells: Should be <1> > > -- clocks: list of clock specifiers, must contain an entry for each > > required > > - entry in clock-names > > -- clock-names: should include entries "ckil", "osc" > > - > > -The clock consumer should specify the desired clock by having the > > clock -ID in its "clocks" phandle cell. See > > include/dt-bindings/clock/imx7d-clock.h > > -for the full list of i.MX7 Dual clock IDs. > > diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml > > b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml > > new file mode 100644 > > index 0000000..8cd0573 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml > > @@ -0,0 +1,64 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 > > +--- > > + > > +title: Clock bindings for Freescale i.MX7 Dual > > + > > +maintainers: > > + - Frank Li <Frank.Li@xxxxxxx> > > + - Anson Huang <Anson.Huang@xxxxxxx> > > + > > +description: | > > + The clock consumer should specify the desired clock by having the > > +clock > > + ID in its "clocks" phandle cell. See > > +include/dt-bindings/clock/imx7d-clock.h > > + for the full list of i.MX7 Dual clock IDs. > > + > > +properties: > > + compatible: > > + const: fsl,imx7d-ccm > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + items: > > + - description: CCM interrupt request 1 > > + - description: CCM interrupt request 2 > > Do we have a more specific description from RM? > Otherwise, I'm fine with this patch. I checked both RM and design doc before, can NOT find any description about these 2 interrupts, so I did NOT add detail descriptions for them. Anson
