Convert the i.MX TPM binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
.../devicetree/bindings/timer/nxp,tpm-timer.txt | 28 ----------
.../devicetree/bindings/timer/nxp,tpm-timer.yaml | 63 ++++++++++++++++++++++
2 files changed, 63 insertions(+), 28 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
create mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
deleted file mode 100644
index f82087b..0000000
--- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-NXP Low Power Timer/Pulse Width Modulation Module (TPM)
-
-The Timer/PWM Module (TPM) supports input capture, output compare,
-and the generation of PWM signals to control electric motor and power
-management applications. The counter, compare and capture registers
-are clocked by an asynchronous clock that can remain enabled in low
-power modes. TPM can support global counter bus where one TPM drives
-the counter bus for the others, provided bit width is the same.
-
-Required properties:
-
-- compatible : should be "fsl,imx7ulp-tpm"
-- reg : Specifies base physical address and size of the register sets
- for the clock event device and clock source device.
-- interrupts : Should be the clock event device interrupt.
-- clocks : The clocks provided by the SoC to drive the timer, must contain
- an entry for each entry in clock-names.
-- clock-names : Must include the following entries: "ipg" and "per".
-
-Example:
-tpm5: tpm@40260000 {
- compatible = "fsl,imx7ulp-tpm";
- reg = <0x40260000 0x1000>;
- interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
- <&clks IMX7ULP_CLK_LPTPM5>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
new file mode 100644
index 0000000..0d34610
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,tpm-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Low Power Timer/Pulse Width Modulation Module (TPM)
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@xxxxxxx>
+
+description: |
+ The Timer/PWM Module (TPM) supports input capture, output compare,
+ and the generation of PWM signals to control electric motor and power
+ management applications. The counter, compare and capture registers
+ are clocked by an asynchronous clock that can remain enabled in low
+ power modes. TPM can support global counter bus where one TPM drives
+ the counter bus for the others, provided bit width is the same.
+
+properties:
+ compatible:
+ const: fsl,imx7ulp-tpm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: SoC TPM ipg clock
+ - description: SoC TPM per clock
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: per
+ maxItems: 2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx7ulp-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ timer@40260000 {
+ compatible = "fsl,imx7ulp-tpm";
+ reg = <0x40260000 0x1000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+ <&pcc2 IMX7ULP_CLK_LPTPM5>;
+ clock-names = "ipg", "per";
+ };
--
2.7.4
