Hi Paul,
Disclaimer: I don't know much about the hardware :-P
On Sun, 17 May 2020 at 00:31, Paul Cercueil <paul@xxxxxxxxxxxxxxx> wrote:
>
> Add support for the Image Processing Unit (IPU) found in all Ingenic
> SoCs.
>
Since the IPU is present on all devices supported, does it make sense
to have it as separate module?
Didn't check closely although I suspect doing that will remove the
need for the component patch.
> --- a/drivers/gpu/drm/ingenic/ingenic-drm.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm.c
> @@ -50,7 +50,7 @@ struct jz_soc_info {
>
> struct ingenic_drm {
> struct drm_device drm;
> - struct drm_plane f0, f1;
> + struct drm_plane f0, f1, *ipu_plane;
> struct drm_crtc crtc;
> struct drm_encoder encoder;
>
> @@ -186,13 +186,16 @@ static void ingenic_drm_crtc_update_timings(struct ingenic_drm *priv,
> regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
> JZ_LCD_CTRL_OFUP | JZ_LCD_CTRL_BURST_16,
> JZ_LCD_CTRL_OFUP | JZ_LCD_CTRL_BURST_16);
> +
> + regmap_write(priv->map, JZ_REG_LCD_IPUR, JZ_LCD_IPUR_IPUREN |
> + (ht * vpe / 3) << JZ_LCD_IPUR_IPUR_LSB);
This hunk also indicates that it may be better to merge the IPU within
the existing driver.
-Emil
