of_phy_connect_fixed_link() is becoming obsolete, and also required platform code to register the fixed PHYs at the specified addresses for those to be usable. Get rid of it and use the new of_phy_is_fixed_link() plus of_phy_register_fixed_link() helpers to transition over the new scheme. Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> --- No changes in v2 drivers/net/ethernet/broadcom/genet/bcmmii.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 4608673beaff..add8d8596084 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -298,6 +298,7 @@ int bcmgenet_mii_config(struct net_device *dev) static int bcmgenet_mii_probe(struct net_device *dev) { struct bcmgenet_priv *priv = netdev_priv(dev); + struct device_node *dn = priv->pdev->dev.of_node; struct phy_device *phydev; unsigned int phy_flags; int ret; @@ -307,15 +308,19 @@ static int bcmgenet_mii_probe(struct net_device *dev) return 0; } - if (priv->phy_dn) - phydev = of_phy_connect(dev, priv->phy_dn, - bcmgenet_mii_setup, 0, - priv->phy_interface); - else - phydev = of_phy_connect_fixed_link(dev, - bcmgenet_mii_setup, - priv->phy_interface); + /* In the case of a fixed PHY, the DT node associated + * to the PHY is the Ethernet MAC DT node. + */ + if (of_phy_is_fixed_link(dn)) { + ret = of_phy_register_fixed_link(dn); + if (ret) + return ret; + + priv->phy_dn = dn; + } + phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, 0, + priv->phy_interface); if (!phydev) { pr_err("could not attach to PHY\n"); return -ENODEV; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html