Re: [PATCH] arm: dts: am33xx-bone-common: add gpio-line-names

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 18, 2020 at 10:18 AM Felipe Balbi <balbi@xxxxxxxxxx> wrote:
> Linus Walleij <linus.walleij@xxxxxxxxxx> writes:
> >> gpiochip0 - 32 lines:
> >>         line   0:   "ethernet"       unused   input  active-high
> >>         line   1:   "ethernet"       unused   input  active-high
> >
> > Why are the ethernet lines not tagged with respective signal name
> > when right below the SPI lines are explicitly tagged with
> > sclk, cs0 etc?
> >
> > Ethernet is usually RGMII and has signal names like
> > tx_clk, tx_d0, tx_en etc.
> >
> > Also some lines seem to be tagged with the pin number
> > like P9_22, P2_21 below, it seems a bit inconsistent
> > to have much information on some pins and very sketchy
> > information on some.
>
> the pin names match the beagle bone documentation and would help users
> figure out which pins on the expansion headers match to a gpio signal.

OK if it is how it looks in the documentation I agree that is what
users need, maybe the documentation is confusing but there is not
much to do about that.

Yours,
Linus Walleij



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux