of_phy_connect_fixed_link() is becoming obsolete, and also required
platform code to register the fixed PHYs at the specified addresses for
those to be usable. Get rid of it and use the new of_phy_is_fixed_link()
plus of_phy_register_fixed_link() helpers to transition over the new
scheme.
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
No changes in v2
drivers/net/ethernet/freescale/ucc_geth.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index c8299c31b21f..fab39e295441 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -1728,9 +1728,6 @@ static int init_phy(struct net_device *dev)
phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0,
priv->phy_interface);
- if (!phydev)
- phydev = of_phy_connect_fixed_link(dev, &adjust_link,
- priv->phy_interface);
if (!phydev) {
dev_err(&dev->dev, "Could not attach to PHY\n");
return -ENODEV;
@@ -3790,6 +3787,17 @@ static int ucc_geth_probe(struct platform_device* ofdev)
ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
ug_info->phy_node = of_parse_phandle(np, "phy-handle", 0);
+ if (!ug_info->phy_node) {
+ /* In the case of a fixed PHY, the DT node associated
+ * to the PHY is the Ethernet MAC DT node.
+ */
+ if (of_phy_is_fixed_link(np)) {
+ err = of_phy_register_fixed_link(np);
+ if (err)
+ return err;
+ }
+ ug_info->phy_node = np;
+ }
/* Find the TBI PHY node. If it's not there, we don't support SGMII */
ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
