On Fri, May 15, 2020 at 01:47:57PM +0300, Serge Semin wrote:
> DebugFS kernel interface provides a dedicated method to create the
> registers dump file. Use it instead of creating a generic DebugFS
> file with manually written read callback function.
With below nit addressed,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
> Cc: Georgy Vlasov <Georgy.Vlasov@xxxxxxxxxxxxxxxxxxxx>
> Cc: Ramil Zaripov <Ramil.Zaripov@xxxxxxxxxxxxxxxxxxxx>
> Cc: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
> Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
> Cc: Paul Burton <paulburton@xxxxxxxxxx>
> Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
> Cc: Arnd Bergmann <arnd@xxxxxxxx>
> Cc: Allison Randal <allison@xxxxxxxxxxx>
> Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Cc: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: linux-mips@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
> drivers/spi/spi-dw.c | 86 ++++++++++++++------------------------------
> drivers/spi/spi-dw.h | 2 ++
> 2 files changed, 28 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
> index 31607b40147d..bb470cff40d3 100644
> --- a/drivers/spi/spi-dw.c
> +++ b/drivers/spi/spi-dw.c
> @@ -29,66 +29,29 @@ struct chip_data {
> };
>
> #ifdef CONFIG_DEBUG_FS
> -#define SPI_REGS_BUFSIZE 1024
> -static ssize_t dw_spi_show_regs(struct file *file, char __user *user_buf,
> - size_t count, loff_t *ppos)
> -{
> - struct dw_spi *dws = file->private_data;
> - char *buf;
> - u32 len = 0;
> - ssize_t ret;
> -
> - buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL);
> - if (!buf)
> - return 0;
> -
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "%s registers:\n", dev_name(&dws->master->dev));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "=================================\n");
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "CTRLR0: \t0x%08x\n", dw_readl(dws, DW_SPI_CTRLR0));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "CTRLR1: \t0x%08x\n", dw_readl(dws, DW_SPI_CTRLR1));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "SSIENR: \t0x%08x\n", dw_readl(dws, DW_SPI_SSIENR));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "SER: \t\t0x%08x\n", dw_readl(dws, DW_SPI_SER));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "BAUDR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_BAUDR));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "TXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_TXFTLR));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "RXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_RXFTLR));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "TXFLR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_TXFLR));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "RXFLR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_RXFLR));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "SR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_SR));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "IMR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_IMR));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "ISR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_ISR));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "DMACR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_DMACR));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "DMATDLR: \t0x%08x\n", dw_readl(dws, DW_SPI_DMATDLR));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "DMARDLR: \t0x%08x\n", dw_readl(dws, DW_SPI_DMARDLR));
> - len += scnprintf(buf + len, SPI_REGS_BUFSIZE - len,
> - "=================================\n");
> -
> - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
> - kfree(buf);
> - return ret;
> +
> +#define DW_SPI_DBGFS_REG(_name, _off) \
> +{ \
> + .name = _name, \
> + .offset = _off \
As previously discussed (did I miss your answer?) the comma at the end leaves
better pattern for maintenance prospective.
> }
>
> -static const struct file_operations dw_spi_regs_ops = {
> - .owner = THIS_MODULE,
> - .open = simple_open,
> - .read = dw_spi_show_regs,
> - .llseek = default_llseek,
> +static const struct debugfs_reg32 dw_spi_dbgfs_regs[] = {
> + DW_SPI_DBGFS_REG("CTRLR0", DW_SPI_CTRLR0),
> + DW_SPI_DBGFS_REG("CTRLR1", DW_SPI_CTRLR1),
> + DW_SPI_DBGFS_REG("SSIENR", DW_SPI_SSIENR),
> + DW_SPI_DBGFS_REG("SER", DW_SPI_SER),
> + DW_SPI_DBGFS_REG("BAUDR", DW_SPI_BAUDR),
> + DW_SPI_DBGFS_REG("TXFTLR", DW_SPI_TXFTLR),
> + DW_SPI_DBGFS_REG("RXFTLR", DW_SPI_RXFTLR),
> + DW_SPI_DBGFS_REG("TXFLR", DW_SPI_TXFLR),
> + DW_SPI_DBGFS_REG("RXFLR", DW_SPI_RXFLR),
> + DW_SPI_DBGFS_REG("SR", DW_SPI_SR),
> + DW_SPI_DBGFS_REG("IMR", DW_SPI_IMR),
> + DW_SPI_DBGFS_REG("ISR", DW_SPI_ISR),
> + DW_SPI_DBGFS_REG("DMACR", DW_SPI_DMACR),
> + DW_SPI_DBGFS_REG("DMATDLR", DW_SPI_DMATDLR),
> + DW_SPI_DBGFS_REG("DMARDLR", DW_SPI_DMARDLR)
> };
>
> static int dw_spi_debugfs_init(struct dw_spi *dws)
> @@ -100,8 +63,11 @@ static int dw_spi_debugfs_init(struct dw_spi *dws)
> if (!dws->debugfs)
> return -ENOMEM;
>
> - debugfs_create_file("registers", S_IFREG | S_IRUGO,
> - dws->debugfs, (void *)dws, &dw_spi_regs_ops);
> + dws->regset.regs = dw_spi_dbgfs_regs;
> + dws->regset.nregs = ARRAY_SIZE(dw_spi_dbgfs_regs);
> + dws->regset.base = dws->regs;
> + debugfs_create_regset32("registers", 0400, dws->debugfs, &dws->regset);
> +
> return 0;
> }
>
> diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
> index 24462b0c65cb..4adce6da6013 100644
> --- a/drivers/spi/spi-dw.h
> +++ b/drivers/spi/spi-dw.h
> @@ -2,6 +2,7 @@
> #ifndef DW_SPI_HEADER_H
> #define DW_SPI_HEADER_H
>
> +#include <linux/debugfs.h>
> #include <linux/irqreturn.h>
> #include <linux/io.h>
> #include <linux/scatterlist.h>
> @@ -150,6 +151,7 @@ struct dw_spi {
>
> #ifdef CONFIG_DEBUG_FS
> struct dentry *debugfs;
> + struct debugfs_regset32 regset;
> #endif
> };
>
> --
> 2.25.1
>
--
With Best Regards,
Andy Shevchenko
