Re: [PATCH] ARM: dts: at91: Configure I2C SCL gpio as open drain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15/05/2020 17:00:01+0300, Codrin Ciubotariu wrote:
> The SCL gpio pin used by I2C bus for recovery needs to be configured as
> open drain.
> 
> Fixes: 455fec938bbb ("ARM: dts: at91: sama5d2: add i2c gpio pinctrl")
> Fixes: a4bd8da893a3 ("ARM: dts: at91: sama5d3: add i2c gpio pinctrl")
> Fixes: 8fb82f050cf6 ("ARM: dts: at91: sama5d4: add i2c gpio pinctrl")
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts   | 6 +++---
>  arch/arm/boot/dts/at91-sama5d2_xplained.dts | 6 +++---
>  arch/arm/boot/dts/sama5d3.dtsi              | 6 +++---
>  arch/arm/boot/dts/sama5d4.dtsi              | 6 +++---
>  4 files changed, 12 insertions(+), 12 deletions(-)
> 

Applied, thanks. There was a small conflict in the sama5d2 board dts,
please check.

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux