Converts the device tree bindings for the Actions Semi Owl SoCs DMA
Controller over to YAML schemas.
It also adds new compatible string "actions,s700-dma" to match
the driver.
Signed-off-by: Amit Singh Tomar <amittomer25@xxxxxxxxx>
---
New patch, was not there in RFC.
---
Documentation/devicetree/bindings/dma/owl-dma.txt | 47 ------------
Documentation/devicetree/bindings/dma/owl-dma.yaml | 84 ++++++++++++++++++++++
2 files changed, 84 insertions(+), 47 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/dma/owl-dma.txt
create mode 100644 Documentation/devicetree/bindings/dma/owl-dma.yaml
diff --git a/Documentation/devicetree/bindings/dma/owl-dma.txt b/Documentation/devicetree/bindings/dma/owl-dma.txt
deleted file mode 100644
index 03e9bb12b75f..000000000000
--- a/Documentation/devicetree/bindings/dma/owl-dma.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* Actions Semi Owl SoCs DMA controller
-
-This binding follows the generic DMA bindings defined in dma.txt.
-
-Required properties:
-- compatible: Should be "actions,s900-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain 4 interrupts shared by all channel.
-- #dma-cells: Must be <1>. Used to represent the number of integer
- cells in the dmas property of client device.
-- dma-channels: Physical channels supported.
-- dma-requests: Number of DMA request signals supported by the controller.
- Refer to Documentation/devicetree/bindings/dma/dma.txt
-- clocks: Phandle and Specifier of the clock feeding the DMA controller.
-
-Example:
-
-Controller:
- dma: dma-controller@e0260000 {
- compatible = "actions,s900-dma";
- reg = <0x0 0xe0260000 0x0 0x1000>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- dma-channels = <12>;
- dma-requests = <46>;
- clocks = <&clock CLK_DMAC>;
- };
-
-Client:
-
-DMA clients connected to the Actions Semi Owl SoCs DMA controller must
-use the format described in the dma.txt file, using a two-cell specifier
-for each channel.
-
-The two cells in order are:
-1. A phandle pointing to the DMA controller.
-2. The channel id.
-
-uart5: serial@e012a000 {
- ...
- dma-names = "tx", "rx";
- dmas = <&dma 26>, <&dma 27>;
- ...
-};
diff --git a/Documentation/devicetree/bindings/dma/owl-dma.yaml b/Documentation/devicetree/bindings/dma/owl-dma.yaml
new file mode 100644
index 000000000000..12e68c0ece67
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/owl-dma.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/owl-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs DMA controller
+
+description: |
+ The OWL DMA is a general-purpose direct memory access controller capable of
+ supporting 10 and 12 independent DMA channels for S700 and S900 SoCs
+ respectively.
+ DMA clients connected to the Actions Semi Owl SoCs DMA controller must
+ use the format described in the owl-dma.yaml file, using a two-cell specifier
+ for each channel.
+
+ The two cells in order are:
+ 1. A phandle pointing to the DMA controller.
+ 2. The channel id.
+
+ uart5: serial@e012a000 {
+ ...
+ dma-names = "tx", "rx";
+ dmas = <&dma 26>, <&dma 27>;
+ ...
+ };
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - actions,s900-dma
+ - actions,s700-dma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 4
+
+ "#dma-cells":
+ const: 1
+
+ dma-channels:
+ maxItems: 1
+
+ dma-requests:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#dma-cells"
+ - dma-channels
+ - dma-requests
+ - clocks
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/actions,s700-cmu.h>
+ dma: dma-controller@e0260000 {
+ compatible = "actions,s900-dma";
+ reg = <0x0 0xe0260000 0x0 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <12>;
+ dma-requests = <46>;
+ clocks = <&clock CLK_DMAC>;
+ };
+
+...
--
2.7.4
