This series converts the DT binding documentation for the TI TFP410
DPI-to-DVI encoder to json-schema.
Some minor changes were made to two DTs in order to make them compliant
with the binding. These changes shouldn't have any functional effect.
This also fixes a minor bug in the ti-tfp410 driver that would cause a
wrong calculation of the setup and hold times when the de-skew feature
is enabled. The retrieval of the de-skew value from the DT has also been
updated to reflect the binding changes.
Changes in v2:
- ti,tfp410.yaml
- Set license as GPL-2.0-only (Sam Ravnborg)
- Complete pclk-sample and bus-width comments (Sam)
- Remove quotes from compatible value (Sam)
- Remove the allOf keyword from the ti,deskew definition (Sam)
- Set endpoint as optional in port definitions
- Set a range for ti,deskew
DTs fixes (added):
- dove-sbc-a510.dts: s/powerdown-gpio/powerdown-gpios (Sam)
- dove-sbc-a510.dts: Add dummy ports node
- imx53-cx9020.dts: Group the ports in a ports node
ti-tfp410.c (added):
- Fix setup time and hold time calculation based on the deskew value
(Laurent Pinchart)
Ricardo Cañuelo (4):
ARM: dts: dove: Make the DT compliant with the ti,tfp410 binding
ARM: dts: ims53: Group port definitions for the dvi-converter
dt-bindings: display: ti,tfp410.txt: convert to yaml
drm/bridge: tfp410: Fix setup and hold time calculation
.../bindings/display/bridge/ti,tfp410.txt | 66 ----------
.../bindings/display/bridge/ti,tfp410.yaml | 124 ++++++++++++++++++
arch/arm/boot/dts/dove-sbc-a510.dts | 13 +-
arch/arm/boot/dts/imx53-cx9020.dts | 25 ++--
drivers/gpu/drm/bridge/ti-tfp410.c | 10 +-
5 files changed, 155 insertions(+), 83 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml
--
2.18.0
