The DT binding support both dual-input and dual-output mode, but only
dual-input is documented. Document dual-output mode.
Suggested-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
.../display/bridge/thine,thc63lvd1024.yaml | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
index 469ac4a34273..fedd3460d6f6 100644
--- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
@@ -30,11 +30,17 @@ properties:
This device has four video ports. Their connections are modeled using the
OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
- The device can operate in single-link mode or dual-link mode. In
- single-link mode, all pixels are received on port@0, and port@1 shall not
- contain any endpoint. In dual-link mode, even-numbered pixels are
- received on port@0 and odd-numbered pixels on port@1, and both port@0 and
- port@1 shall contain endpoints.
+ The device can operate in single or dual input and output modes.
+
+ When operating in single input mode, all pixels are received on port@0,
+ and port@1 shall not contain any endpoint. In dual input mode,
+ even-numbered pixels are received on port@0 and odd-numbered pixels on
+ port@1, and both port@0 and port@1 shall contain endpoints.
+
+ When operating in single output mode all pixels are output from the first
+ CMOS/TTL port and port@3 shall not contain any endpoint. In dual output
+ mode pixels are output from both CMOS/TTL ports and both port@2 and
+ port@3 shall contain endpoints.
properties:
'#address-cells':
--
Regards,
Laurent Pinchart
