Re: [PATCH v3 3/4] soc: amlogic: meson-ee-pwrc: add support for Meson8/Meson8b/Meson8m2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 20/04/2020 22:26, Martin Blumenstingl wrote:
> This adds support for the power domains on Meson8/Meson8b/Meson8m2.
> Meson8 doesn't use any reset lines while Meson8b and Meson8m2 use the
> same set of reset lines (which is different from the newer SoCs).
> Add dedicated compatible strings for Meson8, Meson8b and Meson8m2 to
> support these differences.
> 
> Notable differences between Meson8 and G12A are:
> - there is no HHI_VPU_MEM_PD_REG2 on the 32-bit SoCs
> - the Meson8b datasheet describes an "audio DSP memory" power domain
>   which is used for the hardware audio decoder
> - the "amlogic,ao-sysctrl" only includes the power management related
>   registers on the 32-bit SoCs, meaning the for example the
>   AO_RTI_GEN_PWR_SLEEP0 register is at offset (0x2 << 2) rather than
>   (0x3a << 2). As result of this (0x38 << 2) is subtracted from the
>   register offsets, which is the start of the power management related
>   registers.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> ---
>  drivers/soc/amlogic/meson-ee-pwrc.c | 72 +++++++++++++++++++++++++++--
>  1 file changed, 69 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/soc/amlogic/meson-ee-pwrc.c b/drivers/soc/amlogic/meson-ee-pwrc.c
> index 3f0261d53ad9..b30868da456a 100644
> --- a/drivers/soc/amlogic/meson-ee-pwrc.c
> +++ b/drivers/soc/amlogic/meson-ee-pwrc.c
> @@ -14,6 +14,7 @@
>  #include <linux/reset-controller.h>
>  #include <linux/reset.h>
>  #include <linux/clk.h>
> +#include <dt-bindings/power/meson8-power.h>
>  #include <dt-bindings/power/meson-g12a-power.h>
>  #include <dt-bindings/power/meson-sm1-power.h>
>  
> @@ -22,6 +23,12 @@
>  #define AO_RTI_GEN_PWR_SLEEP0		(0x3a << 2)
>  #define AO_RTI_GEN_PWR_ISO0		(0x3b << 2)
>  
> +/*
> + * Meson8/Meson8b/Meson8m2 only expose the power management registers of
> + * the AO-bus as syscon. Above register offsets need to subtract this offset.
> + */
> +#define AO_RTI_GEN_MESON8_PMU_OFFSET	(0x38 << 2)

This is weird, I would directly add the MESON8 PWR_SLEEP0 offset directly.

> +
>  /* HHI Offsets */
>  
>  #define HHI_MEM_PD_REG0			(0x40 << 2)
> @@ -73,6 +80,13 @@ static struct meson_ee_pwrc_top_domain g12a_pwrc_vpu = {
>  	.iso_mask = BIT(9),
>  };
>  
> +static struct meson_ee_pwrc_top_domain meson8_pwrc_vpu = {
> +	.sleep_reg = AO_RTI_GEN_PWR_SLEEP0 - AO_RTI_GEN_MESON8_PMU_OFFSET,
> +	.sleep_mask = BIT(8),
> +	.iso_reg = AO_RTI_GEN_PWR_SLEEP0 - AO_RTI_GEN_MESON8_PMU_OFFSET,
> +	.iso_mask = BIT(9),
> +};
> +
>  #define SM1_EE_PD(__bit)					\
>  	{							\
>  		.sleep_reg = AO_RTI_GEN_PWR_SLEEP0, 		\
> @@ -124,10 +138,20 @@ static struct meson_ee_pwrc_mem_domain g12a_pwrc_mem_vpu[] = {
>  	VPU_HHI_MEMPD(HHI_MEM_PD_REG0),
>  };
>  
> -static struct meson_ee_pwrc_mem_domain g12a_pwrc_mem_eth[] = {
> +static struct meson_ee_pwrc_mem_domain meson8_pwrc_mem_eth[] = {
>  	{ HHI_MEM_PD_REG0, GENMASK(3, 2) },
>  };

I would rename it meson_pwrc... since it's the same on all SoCs.

>  
> +static struct meson_ee_pwrc_mem_domain meson8_pwrc_audio_dsp_mem[] = {
> +	{ HHI_MEM_PD_REG0, GENMASK(1, 0) },
> +};
> +
> +static struct meson_ee_pwrc_mem_domain meson8_pwrc_mem_vpu[] = {
> +	VPU_MEMPD(HHI_VPU_MEM_PD_REG0),
> +	VPU_MEMPD(HHI_VPU_MEM_PD_REG1),
> +	VPU_HHI_MEMPD(HHI_MEM_PD_REG0),
> +};
> +
>  static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_vpu[] = {
>  	VPU_MEMPD(HHI_VPU_MEM_PD_REG0),
>  	VPU_MEMPD(HHI_VPU_MEM_PD_REG1),
> @@ -201,7 +225,27 @@ static bool pwrc_ee_get_power(struct meson_ee_pwrc_domain *pwrc_domain);
>  static struct meson_ee_pwrc_domain_desc g12a_pwrc_domains[] = {
>  	[PWRC_G12A_VPU_ID]  = VPU_PD("VPU", &g12a_pwrc_vpu, g12a_pwrc_mem_vpu,
>  				     pwrc_ee_get_power, 11, 2),
> -	[PWRC_G12A_ETH_ID] = MEM_PD("ETH", g12a_pwrc_mem_eth),
> +	[PWRC_G12A_ETH_ID] = MEM_PD("ETH", meson8_pwrc_mem_eth),
> +};
> +
> +static struct meson_ee_pwrc_domain_desc meson8_pwrc_domains[] = {
> +	[PWRC_MESON8_VPU_ID]  = VPU_PD("VPU", &meson8_pwrc_vpu,
> +				       meson8_pwrc_mem_vpu, pwrc_ee_get_power,
> +				       0, 1),
> +	[PWRC_MESON8_ETHERNET_MEM_ID] = MEM_PD("ETHERNET_MEM",
> +						  meson8_pwrc_mem_eth),
> +	[PWRC_MESON8_AUDIO_DSP_MEM_ID] = MEM_PD("AUDIO_DSP_MEM",
> +						meson8_pwrc_audio_dsp_mem),
> +};
> +
> +static struct meson_ee_pwrc_domain_desc meson8b_pwrc_domains[] = {
> +	[PWRC_MESON8_VPU_ID]  = VPU_PD("VPU", &meson8_pwrc_vpu,
> +				       meson8_pwrc_mem_vpu, pwrc_ee_get_power,
> +				       11, 1),
> +	[PWRC_MESON8_ETHERNET_MEM_ID] = MEM_PD("ETHERNET_MEM",
> +						  meson8_pwrc_mem_eth),
> +	[PWRC_MESON8_AUDIO_DSP_MEM_ID] = MEM_PD("AUDIO_DSP_MEM",
> +						meson8_pwrc_audio_dsp_mem),
>  };
>  
>  static struct meson_ee_pwrc_domain_desc sm1_pwrc_domains[] = {
> @@ -216,7 +260,7 @@ static struct meson_ee_pwrc_domain_desc sm1_pwrc_domains[] = {
>  	[PWRC_SM1_GE2D_ID] = TOP_PD("GE2D", &sm1_pwrc_ge2d, sm1_pwrc_mem_ge2d,
>  				    pwrc_ee_get_power),
>  	[PWRC_SM1_AUDIO_ID] = MEM_PD("AUDIO", sm1_pwrc_mem_audio),
> -	[PWRC_SM1_ETH_ID] = MEM_PD("ETH", g12a_pwrc_mem_eth),
> +	[PWRC_SM1_ETH_ID] = MEM_PD("ETH", meson8_pwrc_mem_eth),
>  };
>  
>  struct meson_ee_pwrc_domain {
> @@ -470,12 +514,34 @@ static struct meson_ee_pwrc_domain_data meson_ee_g12a_pwrc_data = {
>  	.domains = g12a_pwrc_domains,
>  };
>  
> +static struct meson_ee_pwrc_domain_data meson_ee_m8_pwrc_data = {
> +	.count = ARRAY_SIZE(meson8_pwrc_domains),
> +	.domains = meson8_pwrc_domains,
> +};
> +
> +static struct meson_ee_pwrc_domain_data meson_ee_m8b_pwrc_data = {
> +	.count = ARRAY_SIZE(meson8b_pwrc_domains),
> +	.domains = meson8b_pwrc_domains,
> +};
> +
>  static struct meson_ee_pwrc_domain_data meson_ee_sm1_pwrc_data = {
>  	.count = ARRAY_SIZE(sm1_pwrc_domains),
>  	.domains = sm1_pwrc_domains,
>  };
>  
>  static const struct of_device_id meson_ee_pwrc_match_table[] = {
> +	{
> +		.compatible = "amlogic,meson8-pwrc",
> +		.data = &meson_ee_m8_pwrc_data,
> +	},
> +	{
> +		.compatible = "amlogic,meson8b-pwrc",
> +		.data = &meson_ee_m8b_pwrc_data,
> +	},
> +	{
> +		.compatible = "amlogic,meson8m2-pwrc",
> +		.data = &meson_ee_m8b_pwrc_data,
> +	},
>  	{
>  		.compatible = "amlogic,meson-g12a-pwrc",
>  		.data = &meson_ee_g12a_pwrc_data,
> 

With these fixed:
Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux