Most Arm Ltd. boards are employing a layered bus structure, to map the hardware design (SoC, motherboard, IOFPGA) and structure the DTs. The "simple-bus" nodes only allow a limited set of node names. Switch to use *-bus to be binding compliant. This relies on a pending dt-schema.git fix for now: https://github.com/devicetree-org/dt-schema/pull/38 Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> --- arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 4 ++-- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 2 +- arch/arm64/boot/dts/arm/juno-base.dtsi | 2 +- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 4 ++-- arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi | 4 ++-- arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 4 ++-- 6 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index f4a65d693f15..f5c8f07b4918 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -174,7 +174,7 @@ }; bus@8000000 { - motherboard { + motherboard-bus { model = "V2M-P1"; arm,hbi = <0x190>; arm,vexpress,site = <0>; @@ -220,7 +220,7 @@ port1-otg; }; - iofpga@300000000 { + iofpga-bus@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi index e226c5e080c2..05ae893d1b2e 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi @@ -178,7 +178,7 @@ interrupts = <15>; }; - iofpga@300000000 { + iofpga-bus@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index ee860d539395..bd4e0b15f9c8 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -828,7 +828,7 @@ <0 0 12 &gic 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; }; - site2: tlx@60000000 { + site2: tlx-bus@60000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index f3279327a665..eeee51f1251b 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -92,7 +92,7 @@ }; bus@8000000 { - motherboard { + motherboard-bus { compatible = "arm,vexpress,v2p-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; @@ -133,7 +133,7 @@ vddvario-supply = <&mb_fixed_3v3>; }; - iofpga@300000000 { + iofpga-bus@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi index 350cbf17e8b4..b917d9d3f1c4 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi @@ -6,10 +6,10 @@ */ / { bus@8000000 { - motherboard { + motherboard-bus { arm,v2m-memory-map = "rs2"; - iofpga@300000000 { + iofpga-bus@300000000 { virtio-p9@140000 { compatible = "virtio,mmio"; reg = <0x140000 0x200>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index b81651b1890a..001a0a3c7f66 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -77,7 +77,7 @@ }; bus@8000000 { - motherboard { + motherboard-bus { arm,v2m-memory-map = "rs1"; compatible = "arm,vexpress,v2m-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ @@ -98,7 +98,7 @@ interrupts = <15>; }; - iofpga@300000000 { + iofpga-bus@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; -- 2.17.1
