On Mon, May 04, 2020 at 09:47:48PM +0200, Michał Mirosław wrote: > Document newly introduced IBAT compensation settings. > > Signed-off-by: Michał Mirosław <mirq-linux@xxxxxxxxxxxx> > --- > v2: initial version > --- > Documentation/devicetree/bindings/power/supply/bq25890.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt > index dc9c8f76e06c..bd214945d9dc 100644 > --- a/Documentation/devicetree/bindings/power/supply/bq25890.txt > +++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt > @@ -32,6 +32,10 @@ Optional properties: > - ti,thermal-regulation-threshold: integer, temperature above which the charge > current is lowered, to avoid overheating (in degrees Celsius). If omitted, > the default setting will be used (120 degrees); > +- ti,ibatcomp-resistance: integer, value of a resistor in series with > + the battery (in uOhm); > +- ti,ibatcomp-clamp-voltage: integer, maximum charging voltage adjustment due > + to expected voltage drop on in-series resistor (in uV); Need a unit suffix as defined in property-units.txt Rob
