The PRG_ETHERNET registers on Meson8b and newer SoCs can add an RX
delay. Add a property with the known supported values so it can be
configured according to the board layout.
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
.../bindings/net/amlogic,meson-dwmac.yaml | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index ae91aa9d8616..66074314e57a 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -67,6 +67,19 @@ allOf:
PHY and MAC are adding a delay).
Any configuration is ignored when the phy-mode is set to "rmii".
+ amlogic,rx-delay-ns:
+ enum:
+ - 0
+ - 2
+ default: 0
+ description:
+ The internal RGMII RX clock delay (provided by this IP block) in
+ nanoseconds. When phy-mode is set to "rgmii" then the RX delay
+ should be explicitly configured. When the phy-mode is set to
+ either "rgmii-id" or "rgmii-rxid" the RX clock delay is already
+ provided by the PHY. Any configuration is ignored when the
+ phy-mode is set to "rmii".
+
properties:
compatible:
additionalItems: true
--
2.26.2
