Re: [PATCH v2 1/2] dt-bindings: leds: add cznic,turris-omnia-leds binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 23, 2020 at 08:50:59AM +0200, Marek Behún wrote:
> Add device-tree bindings documentation for Turris Omnia RGB LEDs.
> 
> Signed-off-by: Marek Behún <marek.behun@xxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
>  .../leds/cznic,turris-omnia-leds.yaml         | 113 ++++++++++++++++++
>  1 file changed, 113 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
> new file mode 100644
> index 000000000000..f3d13fa65df2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
> @@ -0,0 +1,113 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/cznic,turris-omnia-leds.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: CZ.NIC's Turris Omnia LEDs driver
> +
> +maintainers:
> +  - Marek Behún <marek.behun@xxxxxx>
> +
> +description:
> +  This module adds support for the RGB LEDs found on the fron panel of the
> +  Turris Omnia router. There are 12 RGB LEDs, they are controlled by device's
> +  microcontroller with which the system communicates via I2C. Each LED is
> +  described as a subnode of this I2C device.
> +
> +properties:
> +  compatible:
> +    const: cznic,turris-omnia-leds
> +
> +  reg:
> +    description: I2C slave address of the microcontroller.
> +    maxItems: 1
> +
> +patternProperties:
> +  "^led[0-9][0-9]?$":

'led-' is preferred. And numbering is usually hex.

What's the numbering here based on? Might be better to use 'reg' (and a 
unit-address) rather than led-sources. led-sources was for cases where 
the control interface (defined by reg) could have differing regulators 
connected to the LEDs.

> +    type: object
> +    allOf:
> +      - $ref: /schemas/leds/common.yaml#
> +    description:
> +      This node can either represent one channel of a RGB LED or a whole RGB
> +      LED.
> +
> +    properties:
> +      led-sources:
> +        description:
> +          List of device current outputs the LED connects to. If one number is
> +          given, the device described by this node will control one channel of a
> +          RGB LED. If three numbers are given (one for each channel of a RGB
> +          LED), the device described by this node will control one RGB LED. In
> +          this case the numbers must increase by one and the first must be a
> +          multiple of 3.
> +        allOf:
> +          - $ref: /schemas/leds/common.yaml#/properties/led-sources

No need for this. It is already done with the previous $ref.

> +          - oneOf:
> +              - items:
> +                  minimum: 0
> +                  maximum: 35
> +                minItems: 1
> +                maxItems: 1
> +              - items:
> +                  enum: [ [ 0, 1, 2 ], [ 3, 4, 5 ], [ 6, 7, 8 ], [ 9, 10, 11 ],
> +                          [ 12, 13, 14 ], [ 15, 16, 17 ], [ 18, 19, 20 ],
> +                          [ 21, 22, 23 ], [ 24, 25, 26 ], [ 27, 28, 29 ],
> +                          [ 30, 31, 32 ], [ 33, 34, 35] ]
> +
> +      color:
> +        description:
> +          Should be one of LED_COLOR_ID_*. Allowed values are red, green or blue
> +          if there is one item in led-sources, otherwise white.
> +        allOf:
> +          - $ref: /schemas/leds/common.yaml#/properties/color

Can be dropped.

> +          - enum: [ 0, 1, 2, 3 ]
> +
> +    required:
> +      - led-sources
> +      - color
> +
> +examples:
> +  - |
> +
> +    #include <dt-bindings/leds/common.h>
> +
> +    i2c0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        led-controller@2b {
> +            compatible = "cznic,turris-omnia-leds";
> +            reg = <0x2b>;
> +
> +            led0 {
> +                led-sources = <33 34 35>;
> +                color = <LED_COLOR_ID_WHITE>;
> +                function = LED_FUNCTION_POWER;
> +                linux,default-trigger = "heartbeat";
> +            };
> +
> +            led1 {
> +                led-sources = <3>;
> +                color = <LED_COLOR_ID_RED>;
> +                function = LED_FUNCTION_INDICATOR;
> +                function-enumerator = <1>;
> +            };
> +
> +            led2 {
> +                led-sources = <4>;
> +                color = <LED_COLOR_ID_GREEN>;
> +                function = LED_FUNCTION_INDICATOR;
> +                function-enumerator = <1>;
> +            };
> +
> +            led3 {
> +                led-sources = <5>;
> +                color = <LED_COLOR_ID_BLUE>;
> +                function = LED_FUNCTION_INDICATOR;
> +                function-enumerator = <1>;
> +            };
> +        };
> +    };
> +
> +...
> -- 
> 2.24.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux