Some host controllers don't support host controller enable via HCE. Reviewed-by: Can Guo <cang@xxxxxxxxxxxxxx> Reviewed-by: Avri Altman <avri.altman@xxxxxxx> Signed-off-by: Seungwon Jeon <essuuj@xxxxxxxxx> Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx> --- drivers/scsi/ufs/ufshcd.c | 76 +++++++++++++++++++++++++++++++++++++-- drivers/scsi/ufs/ufshcd.h | 6 ++++ 2 files changed, 80 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 0e9704da58bd..ee30ed6cc805 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -3534,6 +3534,52 @@ static int ufshcd_dme_link_startup(struct ufs_hba *hba) "dme-link-startup: error code %d\n", ret); return ret; } +/** + * ufshcd_dme_reset - UIC command for DME_RESET + * @hba: per adapter instance + * + * DME_RESET command is issued in order to reset UniPro stack. + * This function now deal with cold reset. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_dme_reset(struct ufs_hba *hba) +{ + struct uic_command uic_cmd = {0}; + int ret; + + uic_cmd.command = UIC_CMD_DME_RESET; + + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_err(hba->dev, + "dme-reset: error code %d\n", ret); + + return ret; +} + +/** + * ufshcd_dme_enable - UIC command for DME_ENABLE + * @hba: per adapter instance + * + * DME_ENABLE command is issued in order to enable UniPro stack. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_dme_enable(struct ufs_hba *hba) +{ + struct uic_command uic_cmd = {0}; + int ret; + + uic_cmd.command = UIC_CMD_DME_ENABLE; + + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_err(hba->dev, + "dme-reset: error code %d\n", ret); + + return ret; +} static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba) { @@ -4251,7 +4297,7 @@ static inline void ufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep) } /** - * ufshcd_hba_enable - initialize the controller + * ufshcd_hba_execute_hce - initialize the controller * @hba: per adapter instance * * The controller resets itself and controller firmware initialization @@ -4260,7 +4306,7 @@ static inline void ufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep) * * Returns 0 on success, non-zero value on failure */ -int ufshcd_hba_enable(struct ufs_hba *hba) +static int ufshcd_hba_execute_hce(struct ufs_hba *hba) { int retry; @@ -4308,6 +4354,32 @@ int ufshcd_hba_enable(struct ufs_hba *hba) return 0; } + +int ufshcd_hba_enable(struct ufs_hba *hba) +{ + int ret; + + if (hba->quirks & UFSHCI_QUIRK_BROKEN_HCE) { + ufshcd_set_link_off(hba); + ufshcd_vops_hce_enable_notify(hba, PRE_CHANGE); + + /* enable UIC related interrupts */ + ufshcd_enable_intr(hba, UFSHCD_UIC_MASK); + ret = ufshcd_dme_reset(hba); + if (!ret) { + ret = ufshcd_dme_enable(hba); + if (!ret) + ufshcd_vops_hce_enable_notify(hba, POST_CHANGE); + if (ret) + dev_err(hba->dev, + "Host controller enable failed with non-hce\n"); + } + } else { + ret = ufshcd_hba_execute_hce(hba); + } + + return ret; +} EXPORT_SYMBOL_GPL(ufshcd_hba_enable); static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer) diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 53096642f9a8..f8d08cb9caf7 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -529,6 +529,12 @@ enum ufshcd_quirks { * that the interrupt aggregation timer and counter are reset by s/w. */ UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR = 1 << 7, + + /* + * This quirks needs to be enabled if host controller cannot be + * enabled via HCE register. + */ + UFSHCI_QUIRK_BROKEN_HCE = 1 << 8, }; enum ufshcd_caps { -- 2.17.1