Am Mittwoch, 21. Mai 2014, 09:34:10 schrieb Sören Brinkmann:
> Hi Matthias,
>
> On Wed, 2014-05-21 at 06:26PM +0200, Matthias Brugger wrote:
> > Add binding documentation for the General Porpose Timer driver of
>
> Typo: Purpose
>
> > the Mediatek SoCs.
> >
> > Signed-off-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
> > ---
> >
> > .../devicetree/bindings/timer/mediatek,mtk-timer.txt | 18
> > ++++++++++++++++++ 1 file changed, 18 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt>
> > diff --git
> > a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
> > b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt new file
> > mode 100644
> > index 0000000..7d909f7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
> > @@ -0,0 +1,18 @@
> > +Mediatek MT6577, MT6572 and MT6589 Timers
> > +---------------------------------------
> > +
> > +Required properties:
> > +- compatible: Should be "mediatek,mtk6577-timer"
> > +- reg: Should contain location and length for timers register.
> > +- clocks: Clocks driving the timer hardware. This list shoud include two
> > + clocks. The order is system clock and as second clock the RTC clock.
> > +
> > +Examples:
> > +
> > + timer {
>
> The node name should be timer@0x10008000
I think the more commonly used variant is
timer@10008000
without the 0x. While some dts files really use @0x they are in the minority.
>
> > + compatible = "mediatek,mtk6577-timer";
> > + reg = <0x10008000 0x80>;
> > + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&system_clk>, <&rtc_clk>;
> > + clock-names = "system-clk", "rtc-clk";
>
> I'm still not convinced that the timer IP calls its clock inputs this
> way, but well.
Maybe this might convince you ;-)
"The GPT includes 5 32-bit timers and one 64-bit timer. Each timer has 4
operation modes, which are ONE-SHOT, REPEAT, KEEP-GO and FREERUN, and can
operate on one of the 2 clock sources, RTC clock (32.768kHz) and system clock
(13MHz)."
Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
