From: Pascal Huerst <pascal.huerst@xxxxxxxxx>
This series of uart controllers is able to work in IrDA mode.
Add per-port flag to the device-tree to enable that feature if needed.
Signed-off-by: Pascal Huerst <pascal.huerst@xxxxxxxxx>
---
drivers/tty/serial/sc16is7xx.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 7d3ae31cc720..e4025b8566a4 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -315,6 +315,7 @@ struct sc16is7xx_one {
struct kthread_work tx_work;
struct kthread_work reg_work;
struct sc16is7xx_one_config config;
+ bool irda_mode;
};
struct sc16is7xx_port {
@@ -994,6 +995,7 @@ static int sc16is7xx_config_rs485(struct uart_port *port,
static int sc16is7xx_startup(struct uart_port *port)
{
+ struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
unsigned int val;
@@ -1032,6 +1034,13 @@ static int sc16is7xx_startup(struct uart_port *port)
/* Now, initialize the UART */
sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_WORD_LEN_8);
+ /* Enable IrDA mode if requested in DT */
+ /* This bit must be written with LCR[7] = 0 */
+ sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
+ SC16IS7XX_MCR_IRDA_BIT,
+ one->irda_mode ?
+ SC16IS7XX_MCR_IRDA_BIT : 0);
+
/* Enable the Rx and Tx FIFO */
sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
SC16IS7XX_EFCR_RXDISABLE_BIT |
@@ -1254,6 +1263,8 @@ static int sc16is7xx_probe(struct device *dev,
SC16IS7XX_IOCONTROL_SRESET_BIT);
for (i = 0; i < devtype->nr_uart; ++i) {
+ char name[32];
+
s->p[i].line = i;
/* Initialize port data */
s->p[i].port.dev = dev;
@@ -1271,6 +1282,9 @@ static int sc16is7xx_probe(struct device *dev,
goto out_ports;
}
+ snprintf(name, sizeof(name), "linux,irda-mode-port-%d", i);
+ s->p[i].irda_mode = device_property_read_bool(dev, name);
+
/* Disable all interrupts */
sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0);
/* Disable TX/RX */
--
2.26.2
