It isn't good to have numeric literals in the code especially if there
are multiple of them and they are related. Moreover in current
implementation the Tx DMA transfer activation level isn't optimal,
since it's hardwired to be at 16-32 bytes level, while it's better
to keep the SPI FIFO buffer as full as possible until all available
data is submitted. So lets introduce the DMA burst level
parametrization macros with optimal values - issue Rx transfer if at
least 16 bytes are available in the buffer and execute Tx transaction
if at least 16 bytes room is opened in SPI Tx FIFO.
Co-developed-by: Georgy Vlasov <Georgy.Vlasov@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@xxxxxxxxxxxxxxxxxxxx>
Co-developed-by: Ramil Zaripov <Ramil.Zaripov@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Ramil Zaripov <Ramil.Zaripov@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Cc: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Cc: Paul Burton <paulburton@xxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Allison Randal <allison@xxxxxxxxxxx>
Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Cc: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
---
drivers/spi/spi-dw-dma.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c
index 201390f7d032..d89a00fb705e 100644
--- a/drivers/spi/spi-dw-dma.c
+++ b/drivers/spi/spi-dw-dma.c
@@ -20,7 +20,9 @@
#define WAIT_RETRIES 5
#define RX_BUSY 0
+#define RX_BURST_LEVEL 16
#define TX_BUSY 1
+#define TX_BURST_LEVEL 16
static bool dw_spi_dma_chan_filter(struct dma_chan *chan, void *param)
{
@@ -172,7 +174,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws,
txconf.direction = DMA_MEM_TO_DEV;
txconf.dst_addr = dws->dma_addr;
- txconf.dst_maxburst = 16;
+ txconf.dst_maxburst = TX_BURST_LEVEL;
txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
txconf.dst_addr_width = convert_dma_width(dws->dma_width);
txconf.device_fc = false;
@@ -244,7 +246,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
rxconf.direction = DMA_DEV_TO_MEM;
rxconf.src_addr = dws->dma_addr;
- rxconf.src_maxburst = 16;
+ rxconf.src_maxburst = RX_BURST_LEVEL;
rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
rxconf.src_addr_width = convert_dma_width(dws->dma_width);
rxconf.device_fc = false;
@@ -269,8 +271,8 @@ static int dw_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
{
u16 imr = 0, dma_ctrl = 0;
- dw_writel(dws, DW_SPI_DMARDLR, 0xf);
- dw_writel(dws, DW_SPI_DMATDLR, 0x10);
+ dw_writel(dws, DW_SPI_DMARDLR, RX_BURST_LEVEL - 1);
+ dw_writel(dws, DW_SPI_DMATDLR, dws->fifo_len - TX_BURST_LEVEL);
if (xfer->tx_buf) {
dma_ctrl |= SPI_DMA_TDMAE;
--
2.25.1
