Hi Tero,
This series adds SERDES PHY support and Type-C USB Super-Speed support
to the J721E EVM.
Please queue this for v5.8. Thanks.
cheers,
-roger
Changelog:
v3:
- Add new DT schema for J721E System controller.
- Re-order system controller's compatible string i.e. most compatible to least.
v2:
- Addressed Rob's comments.
- Changed type-C debounce delay from 300ms to 700ms as 300ms is not
sufficient on EVM.
Kishon Vijay Abraham I (3):
dt-bindings: syscon: Add TI's J721E specific compatible string
arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES
lane mux
Roger Quadros (4):
dt-bindings: mdf: ti,j721e-syscon.yaml: Add J721e system controller
arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX
arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0
arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR
line
.../devicetree/bindings/mfd/syscon.yaml | 1 +
.../bindings/mfd/ti,j721e-syscon.yaml | 69 +++++
.../dts/ti/k3-j721e-common-proc-board.dts | 33 ++-
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 275 ++++++++++++++++++
include/dt-bindings/mux/mux-j721e-wiz.h | 53 ++++
5 files changed, 429 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/ti,j721e-syscon.yaml
create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
