Hi Rob, Thanks for the review. On Tue, 2020-05-05 at 11:15 -0500, Rob Herring wrote: > On Thu, Apr 30, 2020 at 04:09:23PM +0800, Dongchun Zhu wrote: > > Add DT bindings documentation for Omnivision OV02A10 image sensor. > > > > Signed-off-by: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx> > > --- > > .../bindings/media/i2c/ovti,ov02a10.yaml | 148 +++++++++++++++++++++ > > MAINTAINERS | 7 + > > 2 files changed, 155 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml > > new file mode 100644 > > index 0000000..2be4bd2 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml > > @@ -0,0 +1,148 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +# Copyright (c) 2020 MediaTek Inc. > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/i2c/ovti,ov02a10.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Omnivision OV02A10 CMOS Sensor Device Tree Bindings > > + > > +maintainers: > > + - Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx> > > + > > +description: |- > > + The Omnivision OV02A10 is a low-cost, high performance, 1/5-inch, 2 megapixel > > + image sensor, which is the latest production derived from Omnivision's CMOS > > + image sensor technology. Ihis chip supports high frame rate speeds up to 30fps > > + @ 1600x1200 (UXGA) resolution transferred over a 1-lane MIPI interface. The > > + sensor output is available via CSI-2 serial data output. > > + > > +properties: > > + compatible: > > + const: ovti,ov02a10 > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + items: > > + - description: top mux camtg clock > > + - description: devider clock > > + > > + clock-names: > > + items: > > + - const: eclk > > + - const: freq_mux > > + > > + clock-frequency: > > + description: > > + Frequency of the eclk clock in Hertz. > > + > > + dovdd-supply: > > + description: > > + Definition of the regulator used as interface power supply. > > + > > + avdd-supply: > > + description: > > + Definition of the regulator used as analog power supply. > > + > > + dvdd-supply: > > + description: > > + Definition of the regulator used as digital power supply. > > + > > + powerdown-gpios: > > maxItems: 1 > Thanks for the reminder, it would be fixed in next release. > > + description: > > + The phandle and specifier for the GPIO that controls sensor powerdown. > > Can be dropped. Doesn't tell me anything specific to this device. > Fixed in next release. > > + > > + reset-gpios: > > maxItems: 1 > Same as powerdown-gpios. We would just use maxItems only. > > + description: > > + The phandle and specifier for the GPIO that controls sensor reset. > > + > > + rotation: > > + description: > > + Definition of the sensor's placement, valid values are 0 and 180. > > + allOf: > > + - $ref: "/schemas/types.yaml#/definitions/uint32" > > + - enum: > > + - 0 # Sensor Mounted Upright > > + - 180 # Sensor Mounted Upside Down > > + > > + ovti,mipi-tx-speed: > > + description: > > + Indication of MIPI transmission speed select. > > + allOf: > > + - $ref: "/schemas/types.yaml#/definitions/uint32" > > + - enum: [ 3, 4 ] > > + > > + # See ../video-interfaces.txt for details > > + port: > > + type: object > > + additionalProperties: false > > + > > + properties: > > + endpoint: > > + type: object > > + additionalProperties: false > > + > > + properties: > > + remote-endpoint: true > > + link-frequencies: true > > + > > + required: > > + - endpoint > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + - clock-frequency > > + - dovdd-supply > > + - avdd-supply > > + - dvdd-supply > > + - powerdown-gpios > > + - reset-gpios > > + - port > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/mt8183-clk.h> > > + #include <dt-bindings/gpio/gpio.h> > > + > > + i2c { > > + clock-frequency = <400000>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + ov02a10: camera-sensor@3d { > > + compatible = "ovti,ov02a10"; > > + reg = <0x3d>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&clk_24m_cam>; > > + > > + clocks = <&topckgen CLK_TOP_MUX_CAMTG>, > > + <&topckgen CLK_TOP_UNIVP_192M_D8>; > > + clock-names = "eclk", "freq_mux"; > > + clock-frequency = <24000000>; > > + > > + rotation = <180>; > > + ovti,mipi-tx-speed = <3>; > > + > > + dovdd-supply = <&mt6358_vcamio_reg>; > > + avdd-supply = <&mt6358_vcama1_reg>; > > + dvdd-supply = <&mt6358_vcn18_reg>; > > + powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>; > > + reset-gpios = <&pio 109 GPIO_ACTIVE_HIGH>; > > + > > + port { > > + wcam_out: endpoint { > > + remote-endpoint = <&mipi_in_wcam>; > > + link-frequencies = /bits/ 64 <390000000>; > > + }; > > + }; > > + }; > > + }; > > + > > +... > > diff --git a/MAINTAINERS b/MAINTAINERS > > index e64e5db..63a2335 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -12389,6 +12389,13 @@ M: Harald Welte <laforge@xxxxxxxxxxxx> > > S: Maintained > > F: drivers/char/pcmcia/cm4040_cs.* > > > > +OMNIVISION OV02A10 SENSOR DRIVER > > +M: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx> > > +L: linux-media@xxxxxxxxxxxxxxx > > +S: Maintained > > +T: git git://linuxtv.org/media_tree.git > > +F: Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml > > + > > OMNIVISION OV13858 SENSOR DRIVER > > M: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> > > L: linux-media@xxxxxxxxxxxxxxx > > -- > > 2.9.2
