Vikas Sajjan wrote: > > Based on 'for-next' branch of Kgene's linux-samsung tree. > These patches are as per discussions on the driver side patches > which have already been acked. [1] > Sounds good. I will apply this whole series if dt guys have no objection to add the exynos5-sysreg dt binding. Thanks, Kukjin > Changes from v2: > - Addressed kukjin's comments to update DT binding documentation > for sysreg. > - removed the version for each patch. Made all patches version as > same. > > Changes from v1: > - Rebase on 'for-next' branch. > - Removed 'phy-names' property as per discuusion in the driver patches. > [1] > > V1 of this series was the next version for earlier patch-series: > [PATCH v7 0/2] dts: Add usb2phy to Exynos 5250 [2] > > Changes from v7 series: > - Added patches to enable usb 2.0 support on exynos5420; > which include dt nodes for usb2phy as well as ehci and ohci > controllers. > > Changes from v6: > - Splitted the patch into two: > adding syscon nodes to Exynos5250 and Exynos5420 in first; > and phy entry change in the second. > - Changed the name of phandle for usb2phy from 'usb2_phy_new' > to 'usb2_phy_gen' indicating generic phy. > - Using clock macros in dt entries. > > [1] http://www.spinics.net/lists/linux-usb/msg106908.html > http://www.spinics.net/lists/linux-usb/msg106837.html > [2] http://www.spinics.net/lists/linux-usb/msg106427.html > > Kamil Debski (1): > ARM: dts: Add usb2phy to Exynos 5250 > > Vivek Gautam (3): > ARM: dts: Add sysreg sytem controller node to exynos5250 and > exynos5420 > ARM: dts: Add usb2phy support on exynos5420 > ARM: dts: Add usb 2.0 support on exynos5420 > > .../devicetree/bindings/arm/samsung/sysreg.txt | 11 ++++- > arch/arm/boot/dts/exynos5250.dtsi | 27 ++++++++++++ > arch/arm/boot/dts/exynos5420.dtsi | 45 ++++++++++++++++++++ > 3 files changed, 81 insertions(+), 2 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
