Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx> --- New since v1, putting in the same series as Arizona since they share the same regulator binding. Thanks, Charles .../devicetree/bindings/mfd/cirrus,madera.yaml | 317 +++++++++++++++++++++ Documentation/devicetree/bindings/mfd/madera.txt | 114 -------- MAINTAINERS | 6 +- 3 files changed, 320 insertions(+), 117 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/cirrus,madera.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/madera.txt diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml new file mode 100644 index 0000000000000..37e76505da84a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml @@ -0,0 +1,317 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/cirrus,madera.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic Madera class audio CODECs Multi-Functional Device + +maintainers: + - patches@xxxxxxxxxxxxxxxxxxxxx + +description: | + These devices are audio SoCs with extensive digital capabilities and a range + of analogue I/O. + + See also the child driver bindings in: + + bindings/pinctrl/cirrus,madera.yaml + bindings/regulator/wlf,arizona.yaml + bindings/sound/cirrus,madera.yaml + +allOf: + - $ref: /schemas/pinctrl/cirrus,madera.yaml# + - $ref: /schemas/regulator/wlf,arizona.yaml# + - $ref: /schemas/sound/cirrus,madera.yaml# + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l85 + - wlf,wm1840 + then: + properties: + SPKVDDL-supply: + description: + Left speaker driver power supply. + $ref: /schemas/types.yaml#/definitions/phandle + + SPKVDDR-supply: + description: + Right speaker driver power supply. + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - SPKVDDL-supply + - SPKVDDR-supply + else: + required: + - DCVDD-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l15 + - cirrus,cs47l35 + then: + properties: + SPKVDD-supply: + description: + Mono speaker driver power supply. + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - SPKVDD-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l35 + - cirrus,cs47l85 + - cirrus,cs47l90 + - cirrus,cs47l91 + - wlf,wm1840 + then: + properties: + DBVDD2-supply: + description: + Databus power supply. + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - DBVDD2-supply + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l85 + - cirrus,cs47l90 + - cirrus,cs47l91 + - wlf,wm1840 + then: + properties: + DBVDD3-supply: + description: + Databus power supply. + $ref: /schemas/types.yaml#/definitions/phandle + + DBVDD4-supply: + description: + Databus power supply. + $ref: /schemas/types.yaml#/definitions/phandle + - if: + properties: + compatible: + contains: + enum: + - cirrus,cs47l15 + then: + required: + - MICVDD-supply + else: + properties: + CPVDD2-supply: + description: + Secondary charge pump power supply. + $ref: /schemas/types.yaml#/definitions/phandle + + required: + - CPVDD2-supply + +properties: + compatible: + contains: + enum: + - cirrus,cs47l15 + - cirrus,cs47l35 + - cirrus,cs47l85 + - cirrus,cs47l90 + - cirrus,cs47l91 + - cirrus,cs42l92 + - cirrus,cs47l92 + - cirrus,cs47l93 + - cirrus,wm1840 + + reg: + maxItems: 1 + + gpio-controller: + description: + Indicates this device is a GPIO controller. + + '#gpio-cells': + description: + The first cell is the pin number. The second cell is reserved for + future use and must be zero + const: 2 + + interrupt-controller: + description: + Indicates that this device is an interrupt controller. + + '#interrupt-cells': + description: + The first cell is the IRQ number. + The second cell is the flags, encoded as the trigger masks from + bindings/interrupt-controller/interrupts.txt + const: 2 + + interrupts: + description: + The interrupt line the /IRQ signal for the device is connected to. + + reset-gpios: + description: + One entry specifying the GPIO controlling /RESET. As defined in + bindings/gpio.txt. Although optional, it is strongly recommended + to use a hardware reset. + maxItems: 1 + + clocks: + description: + Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3. + minItems: 1 + maxItems: 3 + + clock-names: + description: | + May contain up to three strings: + "mclk1" For the clock supplied on MCLK1, recommended to be a + high quality audio reference clock. + "mclk2" For the clock supplied on MCLK2, required to be an + always on 32k clock. + "mclk3" For the clock supplied on MCLK3. + oneOf: + - items: + - const: mclk1 + - items: + - const: mclk2 + - items: + - const: mclk3 + - items: + - const: mclk1 + - const: mclk2 + - items: + - const: mclk1 + - const: mclk3 + - items: + - const: mclk2 + - const: mclk3 + - items: + - const: mclk1 + - const: mclk2 + - const: mclk3 + + AVDD-supply: + description: + Analogue power supply. + $ref: /schemas/types.yaml#/definitions/phandle + + DBVDD1-supply: + description: + Databus power supply. + $ref: /schemas/types.yaml#/definitions/phandle + + CPVDD1-supply: + description: + Charge pump power supply. + $ref: /schemas/types.yaml#/definitions/phandle + + DCVDD-supply: + description: + Digital power supply, optional on CS47L85, WM1840 where it can + be supplied internally. + $ref: /schemas/types.yaml#/definitions/phandle + + MICVDD-supply: + description: + Microphone power supply, normally supplied internally except on + cs47l24, wm1831 where it is mandatory. + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - gpio-controller + - '#gpio-cells' + - interrupt-controller + - '#interrupt-cells' + - interrupt-parent + - interrupts + - AVDD-supply + - DBVDD1-supply + - CPVDD1-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/madera.h> + i2c@e0004000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0004000 0x1000>; + + cs47l85: codec@1a { + compatible = "cirrus,cs47l85"; + reg = <0x1a>; + + reset-gpios = <&gpio 0>; + wlf,ldoena = <&gpio 1>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <&host_irq1>; + interrupt-parent = <&gic>; + + gpio-controller; + #gpio-cells = <2>; + + AVDD-supply = <&vdd1v8>; + DBVDD1-supply = <&vdd1v8>; + DBVDD2-supply = <&vdd1v8>; + DBVDD3-supply = <&vdd1v8>; + DBVDD4-supply = <&vdd1v8>; + CPVDD1-supply = <&vdd1v8>; + CPVDD2-supply = <&vdd1v2>; + SPKVDDL-supply = <&vdd5v>; + SPKVDDR-supply = <&vdd5v>; + + clocks = <&clks 0>, <&clks 1>, <&clks 2>; + clock-names = "mclk1", "mclk2", "mclk3"; + + cirrus,dmic-ref = <0 0 MADERA_DMIC_REF_MICBIAS1>; + cirrus,inmode = < + MADERA_INMODE_SE MADERA_INMODE_SE + MADERA_INMODE_SE MADERA_INMODE_SE + MADERA_INMODE_DIFF MADERA_INMODE_DIFF + >; + cirrus,max-channels-clocked = <2 0 0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinsettings>; + + pinsettings: settings-pins { + aif1-pin { + groups = "aif1"; + function = "aif1"; + bias-bus-hold; + }; + + aif2-pin { + groups = "aif2"; + function = "aif2"; + bias-bus-hold; + }; + + aif3-pin { + groups = "aif3"; + function = "aif3"; + bias-bus-hold; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/madera.txt b/Documentation/devicetree/bindings/mfd/madera.txt deleted file mode 100644 index 47e2b8bc60519..0000000000000 --- a/Documentation/devicetree/bindings/mfd/madera.txt +++ /dev/null @@ -1,114 +0,0 @@ -Cirrus Logic Madera class audio codecs Multi-Functional Device - -These devices are audio SoCs with extensive digital capabilities and a range -of analogue I/O. - -See also the child driver bindings in: -bindings/pinctrl/cirrus,madera-pinctrl.txt -bindings/regulator/arizona-regulator.txt -bindings/sound/madera.txt - -Required properties: - - - compatible : One of the following chip-specific strings: - "cirrus,cs47l15" - "cirrus,cs47l35" - "cirrus,cs47l85" - "cirrus,cs47l90" - "cirrus,cs47l91" - "cirrus,cs42l92" - "cirrus,cs47l92" - "cirrus,cs47l93" - "cirrus,wm1840" - - - reg : I2C slave address when connected using I2C, chip select number when - using SPI. - - - DCVDD-supply : Power supply for the device as defined in - bindings/regulator/regulator.txt - Mandatory on CS47L15, CS47L35, CS47L90, CS47L91, CS42L92, CS47L92, CS47L93 - Optional on CS47L85, WM1840 - - - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply : - Power supplies for the device - - - DBVDD3-supply, DBVDD4-supply : Power supplies for the device - (CS47L85, CS47L90, CS47L91, WM1840) - - - SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device - (CS47L85, WM1840) - - - SPKVDD-supply : Power supply for the device - (CS47L15, CS47L35) - - - interrupt-controller : Indicates that this device is an interrupt controller - - - #interrupt-cells: the number of cells to describe an IRQ, must be 2. - The first cell is the IRQ number. - The second cell is the flags, encoded as the trigger masks from - bindings/interrupt-controller/interrupts.txt - - - gpio-controller : Indicates this device is a GPIO controller. - - - #gpio-cells : Must be 2. The first cell is the pin number. The second cell - is reserved for future use and must be zero - - - interrupt-parent : The parent interrupt controller. - - - interrupts : The interrupt line the /IRQ signal for the device is - connected to. - -Optional properties: - - - MICVDD-supply : Power supply, only need to be specified if - powered externally - - - reset-gpios : One entry specifying the GPIO controlling /RESET. - As defined in bindings/gpio.txt. - Although optional, it is strongly recommended to use a hardware reset - - - clocks: Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3 - - clock-names: May contain up to three strings: - "mclk1" for the clock supplied on MCLK1, recommended to be a high - quality audio reference clock - "mclk2" for the clock supplied on MCLK2, required to be an always on - 32k clock - "mclk3" for the clock supplied on MCLK3 - - - MICBIASx : Initial data for the MICBIAS regulators, as covered in - Documentation/devicetree/bindings/regulator/regulator.txt. - One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...) - (all codecs) - - One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...) - (all except CS47L85, WM1840) - - The following following additional property is supported for the generator - nodes: - - cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling - capacitors attached. - -Optional child nodes: - micvdd : Node containing initialization data for the micvdd regulator - See bindings/regulator/arizona-regulator.txt - - ldo1 : Node containing initialization data for the LDO1 regulator - See bindings/regulator/arizona-regulator.txt - (cs47l85, wm1840) - -Example: - -cs47l85@0 { - compatible = "cirrus,cs47l85"; - reg = <0>; - - reset-gpios = <&gpio 0>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <&host_irq1>; - interrupt-parent = <&gic>; - - gpio-controller; - #gpio-cells = <2>; -}; diff --git a/MAINTAINERS b/MAINTAINERS index 92a96cc0ea734..82fb3a4cd81bd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4086,9 +4086,9 @@ L: patches@xxxxxxxxxxxxxxxxxxxxx S: Supported W: https://github.com/CirrusLogic/linux-drivers/wiki T: git https://github.com/CirrusLogic/linux-drivers.git -F: Documentation/devicetree/bindings/mfd/madera.txt -F: Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt -F: Documentation/devicetree/bindings/sound/madera.txt +F: Documentation/devicetree/bindings/mfd/cirrus,madera.yaml +F: Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml +F: Documentation/devicetree/bindings/sound/cirrus,madera.yaml F: drivers/gpio/gpio-madera* F: drivers/irqchip/irq-madera* F: drivers/mfd/cs47l* -- 2.11.0
